What should I do if the Volkswagen wheel hub is deformed?

What to do about the deformation of Volkswagen Wheels is a high-tech enterprise in my country focusing on R&D, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) , strategic location and convenient transportation. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

The compressive strength of aluminum alloy wheels is quite high, and the compressive capacity of ordinary household wheels is more than 20 tons. The use of such wheels in actual trucks can meet the requirements, but the brittleness of aluminum alloy materials is poor, that is, when the compression limit is 20 tons, the elastic deformation space before fracture is very small, as long as the standard basic fracture moment is exceeded. Therefore, off-road vehicles often do not use aluminum alloy wheels. Occasionally flying will easily cause the wheel to break, but again, the possibility of such a situation is very small for off-road domestic vehicles. The wheels of this material can meet various paved and normal non-paved roads. road commuting.

Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "to satisfy all customers", strong research and development capabilities; The company has a complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". Painted automobile wheels In order to enhance the external beauty of aluminum alloy wheels and protect the environment, the traditional painting process and electroplating process will be gradually reduced and replaced by water-based powder coating technology.

After polishing and spraying transparent powder, the appearance of bright metal hub can replace electroplating. Coated wheels are not only colorful, but also environmentally friendly and exquisite, which can meet your needs to a large extent. Brushing is a means of surface treatment, through the grinding of products to form lines on the surface of the workpiece, so as to play a decorative role, because this tire seems to have two colors, and the surface is shiny, which is also one of the important factors for car owners to choose wheel brushing one.

The company was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production and brand management. Compared with steel wheels, aluminum alloy wheels have obvious advantages: low density, about 1/3 of steel wheels, which means that aluminum wheels with the same volume will be 2/3 lighter than steel wheels. Statistics show that if the vehicle quality is reduced by 10%, the fuel efficiency can be increased by 6% to 8%.

Therefore, the promotion of aluminum alloy wheels is of great significance to energy saving, emission reduction and low-carbon life. The thermal conductivity of aluminum is higher than that of steel, so under the same conditions, the heat dissipation performance of aluminum alloy wheels is better than that of steel wheels. Many people think that as long as the car hub does not touch the outer metal plate when installing, in fact, when disassembling the wheel, if you look carefully at the structure inside, it is easy to get stuck in many places, especially after the car is started, on rough roads, the shock absorber Instantly compresses.

Therefore, make good use of large wheels. You must drive beautifully. Also pay attention to the width of the rim.

Second, the brake calipers snap onto the rim. Because cars these days often use large calipers for safety, a 4lb caliper is much bigger than a can. Underbiased and poorly designed wheels often get stuck on the brake calipers.

Fortunately, it's easy to spot in this case. Aluminum alloy wheels are more suitable for passenger cars than steel wheels. At present, their manufacturing processes can be divided into three categories. The first is casting, which is the process of choice for most car manufacturers today.

Low-pressure casting is a process in which molten aluminum is filled into a mold under pressure and solidifies and crystallizes under pressure. In the same situation, compared with gravity casting, the internal structure of low-pressure casting hub is denser and stronger. At present, low-pressure casting has become a process for producing aluminum alloy wheels, and most domestic aluminum alloy wheel manufacturers use low-pressure casting.

What to do if the Volkswagen wheel is deformed If the aluminum alloy wheel is broken, in order to save costs, you still go to some unprofessional places for repairs, then you are very wrong, so the repaired wheels are not guaranteed. In fact, many places are reworked by the original factory process, and the airtight test, grinding, painting and other processes can be reworked. If you're concerned about safety, the hubs are also cast from an aluminum alloy solution during the casting process.

Similarly, the welding is carried out by means of internal and external welding, and the same aluminum alloy material is used, so there is no need to worry about quality problems.