Automobile hubs include aluminum spokes and rim steel, aluminum spokes with arcs along the cavity around the spokes, arc chambers with positioning irons, irons generated by arcs embedded in cavities, steel welded on embedded irons, embedded irons formed by low-pressure molds Cavity embedded arc, embedded iron is U-shaped, section is L-shaped, arc with arc chamber. The low-pressure mold includes an upper mold and a lower mold. The upper mold is equipped with a detachable positioning rod, and the upper mold groove is equipped with an upper and lower positioning rod. The upper and lower positioning rods are the circumference of the aluminum wheel decorative edge, and an iron piece is inserted between the upper mold and the lower mold. , the positioning rod enters the groove on the upper die from bottom to top through the positioning hole on the iron piece. Due to the limitation of welding performance between aluminum and steel, the steel rim can be welded to the iron insert after adding the iron insert. The steel ring has the advantages of high strength and long service life. The aluminum spoke center plate design is lighter in weight. The fuel consumption is lower, the welded rim size can be changed according to customer requirements, and the products are more diversified.
The production of automobile wheels must meet the requirements of the industry, and some customers will choose to customize. If you want to know more about it, it is recommended to pay attention to this website. Tags: car hub.