Geely modified wheels are divided into aluminum alloy wheels and steel wheels, and aluminum alloy wheels are divided into forging and casting. The fatigue strength and bending strength of forged aluminum alloy wheels are much higher than those of steel wheels. Under the same environment, the heat dissipation coefficient of aluminum alloy wheels is three times that of steel wheels, and the maximum bearing capacity of forged aluminum alloy wheels is five times that of steel wheels. Aluminum alloy wheels have the characteristics of light weight, tire saving, beautiful appearance and so on.
At the same time, the safety of forged aluminum alloy wheels is much higher than that of steel rings. According to JIT standards, when the vehicle hits the threshold at 50 km/h, only the forged aluminum alloy wheels can keep running. The company takes "survival by quality, market by reputation, development by science and technology, and efficiency by management" as its business purpose. In order to ensure that every wheel hub can do better, the company has built a strict quality monitoring and testing system. , Products have passed TS16949 quality system certification.
The products include cast wheels and forged wheels. The annual output of casting wheels reaches about 1.1 million pieces, and the annual output of forged wheels reaches about 18,000 pieces. The products not only cover nearly 30 provinces, municipalities and autonomous regions in China, but also are exported to the United States, Russia, Southeast Asia, and the Middle East. , Japan, Singapore, Iraq and other dozens of regions. In order to meet the market demand, the company is still constantly reforming and innovating, improving management level, improving product quality, giving full play to the company's technical advantages, brand advantages, talent advantages and customer advantages in the industry, and striving to build the company into a competitive and competitive company in the industry. An enterprise with influence and development potential. The density of steel is significantly higher than that of aluminum alloy building materials, which is why aluminum alloy has been used for lightweight automobile chassis in my country; automobile wheels are "non-sprung parts".
If the unsprung mass cost is too large, it will inevitably affect the work performance, handling performance and actual fuel consumption. Just like a car hub, the weight loss of the hub is a direct result of the controlled torque output of the engine; because the powertrain transmitted to the wheel via the half shaft needs to be able to overcome the priority thing is the mass of the wheel (weight/drag during operation) , so the power at the hub of the car needs to be synchronized and can be lowered. Over the years, all employees of the company have been determined to forge ahead, and the technology and equipment have been continuously improved, forming a full-coverage aluminum alloy wheel forging business.
In order to adapt to the development of the market, a group of technical and management talents have been trained, and a good market reputation has been formed. It will develop in the direction of "higher and farther" and better serve the majority of car owners and the society. Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking. In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving.
Check for scars. If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt. When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar.
Use the brush tip to apply topcoat to the damaged parts of the car hub. After drying, it shrinks slightly. The company has a management team with excellent technology and rich management experience, adheres to the corporate philosophy of "customer first", builds core competitiveness, gives full play to comprehensive advantages, strives for progress in stability, and creates an excellent brand in the alloy wheel industry, so that strong quality and fashion peers.
Ordinary aluminum alloy wheels are light in weight and fast in speed. The moment of inertia of aluminum alloy wheels is much smaller than that of steel wheels. Therefore, the installation of aluminum alloy wheels can make the car more sensitive in terms of acceleration, turning and braking, and the lightweight wheels can make the car speed up faster.
In addition to excellent performance on flat roads, lightweight wheels can also improve comfort on bumpy roads. The cooling effect is better. Aluminum alloy has high strength, narrow spokes, and easy styling, which can leave a larger ventilation space, accommodate larger brake calipers and brake discs, and reduce temperature more effectively.
Since car wheels can be electroplated, scratches can be repaired. It can be repaired according to the repair method of hub vacuum plating. Moreover, with the maturity of the wheel electroplating industry, it is not limited to electroplating black and white, but can be customized according to the owner's personal preferences.
However, if your original hubs were plated, the scratches can be repaired. There are two types of plating wheels: water plating and vacuum plating. The water plating process will not produce scratches, but will corrode the hub.
After the hub is corroded, it can be repaired, that is, the stripping time is long, and the water plating repair time is long. However, the water electroplating process pollutes the environment very much, and there are few cases of water electroplating at present. First of all, the aluminum alloy hub is lighter than the iron hub, so the four hubs added together will be much lighter than the iron hub.
If the car is driven at high speeds, it will basically be lighter and more fuel efficient. Secondly, generally speaking, aluminum alloy wheels are equipped with disc brakes. This kind of brake needs to dissipate heat to the ventilation disc, and the aluminum alloy material of the aluminum alloy wheel hub also has a large mesh, so the heat dissipation effect will be better.
Alloy wheels would look even better. First of all, iron hubs are cheap, and now iron hubs are pressed. And it is basically the same mold, the pattern on the hub has not changed, so it is cheaper.