About JWHEEL What should I do if my wheels are scratched? user manual | JWHEEL

   Car wheels are scratched is also a pain in the heart of many car owners, the road in the gravel as well as road teeth are wheel hub scratch invisible killer, such as side parking, a careless wheel hub is very likely to leave scratches, take to the 4S shop? I believe that the kind of 4S shop as long as you can replace the core idea of resolutely not to repair, in other words, be prepared to money on the line, in fact, the wheels and car paint is the same can be repaired, and wheel repair process is very simple, the following will give you a specific details!

     

1.First of all, clean the hubs clean the hubs (you can remove the hubs, so that it is convenient to do the trick, of course, do not remove can also be), after cleaning the hubs and towel dry, pay attention to clean to remove the oil and wax paper to wipe off the surface of the hubs, not then face painting has an impact, remove the hubs can incidentally slightly clean the wheels on the iron filings and stones see iron filings or quite a lot!

2.Fill the scratches with water sandpaper and rub the scratches back and forth until the scratches become shiny, then apply the atomic ash evenly, this time pay attention, you can divide it into several applications, but this interval should be about 10 minutes, because to let the atomic ash become dry, then is to see the effect, if it is still very frizzy, then you can again use water sandpaper sanding, fill with atomic ash, until this The scratched areas of the wheel become as good as new.

3.After painting and oiling, we have to repaint the wheel, but before painting, it is best to use used newspapers to isolate the edge of the wheel to avoid spraying liquid on the tyre, then spray the wheel with liquid against the atomic ash applied in the previous step, and gently spray back and forth a few times, so that the whole step of repairing the scratched wheel is complete, it is very simple, you can try it next time. In our daily life, whether you are a novice or a veteran driver, wheel cuts are inevitable, although many people may not care about this situation, but for car lovers, it may be a pretty disturbing thing, especially some high-end luxury brand models, wheel cuts are really fatal, really with disfigurement almost, and at this time, wheel repair can help a lot, after all, spend a little money can After all, a small amount of money can save a complete "it", I believe many people are still willing to try.

                    

  Jwheel, as an professional wheel manufacturer, concentrates in R&D and manufacturing of aluminum alloy wheels, including casting wheels, forging wheels and flow-form wheels. The products of it have passed the certifications of SEI、SEMA，VIA, JWL, JWL-T, TUV and so on. Since establishment, Jwheel has been developing steadily, with rich experience of designing and producing aluminum alloy wheels. It has earned the appreciation of both domestic market and foreign market with its high technology, good quality and customer service. It provided OEM service to many international brands like Vossen, OE Wheel, TSW, Rays, ProLine, Oxygen, AUTEC, etc., and it also provide ODM service, that is, for producing a new wheel, you can just provide a sketch, drawing or picture, and then Jwheel will finish the rest parts. By the way, the MOQ of forging wheels is four. (For more information, just go to the website: https://www.jjjwheel.com)

J259        18X8    50    114.3*5H    64.2    MUC+F/MIUC66DP