how to install The wheels are too dirty to be cleaned?? | JWHEEL

  Have you noticed that after washing your car, the body is very clean but the wheels are dirty and hard to wash off? Usually we often take care of the engine and often wipe the interior and bodywork, but the care for the wheels is really too little. Many car enthusiasts say that the car has been open for several years, usually normal maintenance, but the wheels have not been paying attention to cleaning, the results want to thoroughly wash a wash found already wash out, the car is still quite new, but a closer look at the wheel stains, very affect the aesthetic. So how in the end should the wheels be cleaned, both clean and will not scratch the wheels?

     

Why are wheels so difficult to clean?

The most difficult thing to clean is the powder from the braking line. Careful owners will find that the front wheels are dirtier than the rear wheels, but in fact the braking force is not evenly distributed among the four wheels. The braking force is not evenly distributed among the four wheels. The front and rear wheels are not subject to the same braking force when braking. The braking force applied to the front wheels is not the same, but is usually greater at the front wheels. The distribution of braking force throughout the braking system is generally controlled by a proportional valve (ABS system). How can I get my wheels cleaner?

 

Pay attention to daily cleaning, when you first buy the car you should pay attention to rinsing the wheels frequently, preferably once a week or half a month with a water gun by yourself. Rinse them with water, then brush them with a sponge and rinse them off afterwards to avoid damaging the tyres. Also, when rinsing the wheels with a water gun, rinse them from top to bottom to get them clean.

 

Many household cleaners are too strong for the surface of the wheels and should not be used. This is because household cleaners such as washing powder and detergent are highly caustic and will cause permanent damage to the surface of the wheel if they come into contact with it.

                    

When there are stubborn stains, it is advisable to use a special cleaner, which often gives good results. Also be careful when removing stains not to use hard substances to polish the wheels as this will damage the glossy protective paint on the wheel surface. Also do not scratch the wheels while driving. If you scratch or fail to remove the dirt, the best way is to have all four wheels repainted.

  Jwheel, as an professional wheel manufacturer, concentrates in R&D and manufacturing of aluminum alloy wheels, including casting wheels, forging wheels and flow-form wheels. The products of it have passed the certifications of SEI、SEMA，VIA, JWL, JWL-T, TUV and so on. Since establishment, Jwheel has been developing steadily, with rich experience of designing and producing aluminum alloy wheels. It has earned the appreciation of both domestic market and foreign market with its high technology, good quality and customer service. It provided OEM service to many international brands like Vossen, OE Wheel, TSW, Rays, ProLine, Oxygen, AUTEC, etc., and it also provide ODM service, that is, for producing a new wheel, you can just provide a sketch, drawing or picture, and then Jwheel will finish the rest parts. By the way, the MOQ of forging wheels is four. (For more information, just go to the website: https://www.jjjwheel.com)

J261-15 15x4.5 45 100*4H 64/67 MC/MIGM21

              15x6 33/44 139.7*6H 100/106

J261-16 16x5 45 100*4H 64/67

              16x6 42 100*4H 64/67

              16x6.5 38/48 139.7*6H 65/106

              16x7 42 114.3*5H 73

J261-17 17x7 42 114.3*5H 73

              17x7.5 28/40 139.7*6H 108.5/110.5

J261-18 18x8 25/40 139.7*5H 108.5/110.5