How to replace Nissan forged wheels

2023/05/01

How to replace Nissan forged wheels If the original 17-inch car wheels want to be replaced with larger sizes, such as 18-inch wheels, the corresponding value will be higher. According to the formula, the diameter difference between old and new tires should be controlled at about 3% to ensure driving safety. As a result, optional tires will be wider and have thinner natural sidewalls.

If you don't mind the increase in fuel consumption and think the larger size is more appealing, there are a lot of things you should be aware of when driving after buying. Because the car hub is relatively large, the tire is relatively wide, and the tire wall is relatively thin, so if you do not pay attention, the probability of a bulge or a flat tire will be much higher than that of a small wheel hub. The company takes "survival by quality, market by reputation, development by science and technology, and efficiency by management" as its business purpose. In order to ensure that every wheel hub can do better, the company has built a strict quality monitoring and testing system. , Products have passed TS16949 quality system certification.

The products include cast wheels and forged wheels. The annual output of casting wheels reaches about 1.1 million pieces, and the annual output of forged wheels reaches about 18,000 pieces. The products not only cover nearly 30 provinces, municipalities and autonomous regions in China, but also are exported to the United States, Russia, Southeast Asia, and the Middle East. , Japan, Singapore, Iraq and other dozens of regions. In order to meet the market demand, the company is still constantly reforming and innovating, improving management level, improving product quality, giving full play to the company's technical advantages, brand advantages, talent advantages and customer advantages in the industry, and striving to build the company into a competitive and competitive company in the industry. An enterprise with influence and development potential. How to replace Nissan Forged Wheels Clean the car wheels and check for any scratches, depth of scratches, damage to the wheels.

For example, a car wheel with cracks, deformation or complete fracture on the surface cannot be repaired. After washing the hubs, dry them with a towel. After cleaning, pay attention to cleaning the hub with oil wax paper.

First remove the tire, release the tire pressure, squeeze the tire into a flat state, and then directly remove the rim on the tire puller (this can avoid the tire from entering water during construction). If the wheel hub is not damaged or deformed, it can be repaired. After cleaning the wheel hub , dry with a towel, and pay attention to cleaning the hub with wax paper after cleaning. Over the years, all employees of the company have been determined to forge ahead, and the technology and equipment have been continuously improved, forming a full-coverage aluminum alloy wheel forging business. In order to adapt to the development of the market, a group of technical and management talents have been trained, and a good market reputation has been formed. It will develop in the direction of "higher and farther" and better serve the majority of car owners and the society.

How to replace Nissan forged wheels with aluminum alloy wheels The compressive strength is quite high, and the compressive capacity of ordinary household wheels is more than 20 tons. The use of such wheels in actual trucks can meet the requirements, but the brittleness of aluminum alloy materials is poor, that is, when the compression limit is 20 tons, the elastic deformation space before fracture is very small, as long as the standard basic fracture moment is exceeded. Therefore, off-road vehicles often do not use aluminum alloy wheels. Occasionally flying will easily cause the wheel to break, but again, the possibility of such a situation is very small for off-road domestic vehicles. The wheels of this material can meet various paved and normal non-paved roads. road commuting.

The company has a management team with excellent technology and rich management experience, adheres to the corporate philosophy of "customer first", builds core competitiveness, gives full play to comprehensive advantages, strives for progress in stability, and creates an excellent brand in the alloy wheel industry, so that strong quality and fashion peers. In fact, it's not necessarily because aluminum alloys are much weaker than steel. In order to ensure strength, the volume of aluminum alloy wheels is very large.

So, in general, traditional alloy wheels don't have to be lighter. Even many spare tires have steel rims, which are lighter than aluminum rims (full size). The real weight advantage is those forged wheels.

Because the forging process improves the strength, the volume can be reduced, reflecting the weight advantage. If your spare tire is a full-size steel wheel, you can check whether it is an aluminum alloy wheel or a steel wheel. Painted automobile wheels In order to enhance the external beauty of aluminum alloy wheels and protect the environment, the traditional painting process and electroplating process will be gradually reduced and replaced by water-based powder coating technology.

After polishing and spraying transparent powder, the appearance of bright metal hub can replace electroplating. Coated wheels are not only colorful, but also environmentally friendly and exquisite, which can meet your needs to a large extent. Brushing is a means of surface treatment, through the grinding of products to form lines on the surface of the workpiece, so as to play a decorative role, because this tire seems to have two colors, and the surface is shiny, which is also one of the important factors for car owners to choose wheel brushing one.

How to replace Nissan forged wheels Under the premise of the same weight, aluminum alloy wheels are more impact resistant, while steel wheels are more flexible. The impact force that can deform a steel wheel may not deform an aluminum alloy wheel, because aluminum alloy wheels are thicker. However, when the impact force is large enough to a certain extent, the aluminum alloy wheel may break directly, while the steel wheel will only deform more seriously.

Under the premise of ensuring the strength, the lighter the hub, the better, the more sensitive the suspension response, the less effort the hub rotates, the better the acceleration, and the better the theoretical fuel consumption. Aluminum alloy wheels are generally considered to be lighter.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
ภาษาไทย
Nederlands
हिन्दी
한국어
日本語
العربية
Português
italiano
русский
français
Deutsch
Español
Current language:English