What should I do if the Toyota forged wheel is deformed?

2023/03/19

Toyota Forged Wheels is deformed. It is a high-tech enterprise in my country that focuses on the R&D, design, production and sales of aluminum alloy wheels. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) ), strategic location and convenient transportation. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

Ordinary aluminum alloy wheels are light in weight and fast in speed. The moment of inertia of aluminum alloy wheels is much smaller than that of steel wheels. Therefore, the installation of aluminum alloy wheels can make the car more sensitive in terms of acceleration, turning and braking, and the lightweight wheels can make the car speed up faster.

In addition to excellent performance on flat roads, lightweight wheels can also improve comfort on bumpy roads. The cooling effect is better. Aluminum alloy has high strength, narrow spokes, and easy styling, which can leave a larger ventilation space, accommodate larger brake calipers and brake discs, and reduce temperature more effectively.

Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "to satisfy all customers", strong research and development capabilities ; The company has a complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". When the surface of the car hub is worn by hard objects, the air can directly contact the aluminum, oxidize at the damaged part first, and then gradually spread to the surrounding area for oxidation in the future.

Oxidation of car wheels is usually caused by corrosive chemical products. Remove dust and debris, get clean alloy wheels from the store, and avoid acidic detergents. Mix the right amount of water and detergent in a bucket.

Sponge soaked in detergent and bucket. Squeeze the sponge bucket to avoid wasting detergent. Wipe the wheels with a sponge.

Founded in 2011, after more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production, and brand management. Many car owners accidentally hit the side of the road or a corner when parking, scratching or causing the wheels to deform. Scratches are not a big problem, if the car hub is deformed or just falls off, it needs to be replaced.

Car owners should pay attention to daily driving to avoid scratching the hub due to luck. Pay attention to daily maintenance, check and clean the oil regularly, and there will be no major problems. Wash the car hub with clean water and wait for the hub to cool down before washing.

When the car is running, the wheel hub will rub against the tires and brake pads to generate heat. If you wash it with water immediately, the material of the hub will change, which can easily cause discoloration of the outer coating. Use soap and water to wipe off the oil. When the vehicle is moving forward, it presses down on a hard, sharp object that is higher than the distance between the outer edge of the car's wheel hub and the ground, and is located on the outer edge of the tire.

When the tire was pressed against the object, the sharp corner of the object just hit the outer edge of the tire, piercing the fragile outer edge of the tire (this would explain the radial fracture of the tire). After a tire blows out, it immediately loses its cushioning ability. A hard object hit the hub directly, causing the hub to break near the edge of the valve (this would explain the defect in the edge of the hub).

It then causes the entire hub to break. Or when the hub encounters a large pit, it will pass quickly, exceeding the bearing range of the hub, resulting in fracture. When a car wheel is turned against the edge of the road, it is easy to damage the outer edge of the wheel.

In this case, the main structure has not changed, so the safety performance of the hub is basically not affected, as long as it is repaired. Blasting to clean dirt, sanding, putty filling, fine sanding and painting. After these repair steps, the hub is basically brand new.

The wheel hub is made of aluminum alloy, and the metal has poor fatigue resistance. After it is deformed under the action of external force, it is forced to return to its original state by external force. Even if there are tiny cracks on the surface, the metal structure here is completely different from ordinary wheels from a scientific point of view.

Alloy wheel designs are often very eye-catching, and besides high quality and durability, the aesthetics of the alloy wheels are a key priority. Aluminum alloy wheels are designed according to the weight and balance stability when installed, and the style of each car. Aluminum alloy wheels are heavier than the spokes to a certain extent, which helps the motorcycle to lower its center of gravity and maintain stability when driving at high speeds and cornering.

In addition, the core problem of aluminum alloy wheels also depends on the suspension, and the tires will also be affected to a certain extent.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
ภาษาไทย
Nederlands
हिन्दी
한국어
日本語
العربية
Português
italiano
русский
français
Deutsch
Español
Current language:English