What should I do if the original wheel hub of Mazda is deformed?

Mazda's original wheel is deformed. It is a high-tech enterprise in my country that focuses on the research and development, design, production and sales of aluminum alloy wheels. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui). ), strategic location and convenient transportation. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

Under the premise of the same weight, aluminum alloy wheels are more impact-resistant, while steel wheels are more flexible. The impact force that can deform a steel wheel may not deform an aluminum alloy wheel, because aluminum alloy wheels are thicker. However, when the impact force is large enough to a certain extent, the aluminum alloy wheel may break directly, while the steel wheel will only deform more seriously.

Under the premise of ensuring the strength, the lighter the hub, the better, the more sensitive the suspension response, the less effort the hub rotates, the better the acceleration, and the better the theoretical fuel consumption. Aluminum alloy wheels are generally considered to be lighter. What should I do if the original Mazda wheel hub is deformed? Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "to satisfy all customers", strong research and development capabilities ; The company has a complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs".

Slight deformations are not visible to the naked eye, and deformations are not visible inside car wheels. At this time, when driving fast, the steering wheel shakes, indicating that the wheel hub of the car may be deformed, and it is time to balance it. Hub flanges are divided into inner flanges and outer flanges.

The outer flange is visible, but the inner bridge is not. However, when getting out of the car at high speed, you can pay attention to whether there is vibration in the steering wheel or whether the tire is leaking. If there is one of these two cases, it must be deformed.

If the hub of a car is cracked in a big pit, it will definitely be deformed. At this time, it is necessary to repair the deformation when repairing the crack. Mazda's original wheels are deformed. The company was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production and brand management.

When the vehicle is moving forward, it presses down on a hard, sharp object that is higher than the distance between the outer edge of the car's wheel hub and the ground, and is located on the outer edge of the tire. When the tire was pressed against the object, the sharp corner of the object just hit the outer edge of the tire, piercing the fragile outer edge of the tire (this would explain the radial fracture of the tire). After a tire blows out, it immediately loses its cushioning ability.

A hard object hit the hub directly, causing the hub to break near the edge of the valve (this would explain the defect in the edge of the hub). It then causes the entire hub to break. Or when the hub encounters a large pit, it will pass quickly, exceeding the bearing range of the hub, resulting in fracture.

The material development of ordinary automobile wheels is not ordinary pig iron, but steel with a carbon content of 2.0% or less; but the proportion of pig iron is as high as 2.0% to 4.5%, so in mechanical design, there is a big gap between the strength and toughness of the two different materials . However, even steel is not very strong. For example, body A-pillars made of hot-formed steel with a yield strength of up to 1,500 MPa may still bend in a crash.

Therefore, the compression ability of the steel wheel hub is relatively weak, that is to say, it is relatively simple and easy to deform. The compressive strength of aluminum alloy wheels is quite high, and the compressive capacity of ordinary household wheels is more than 20 tons. The actual use of this kind of wheel hub for trucks can meet the requirements, but the brittleness of the aluminum alloy material is poor, that is, when the compression limit is 20 tons, the elastic deformation space before fracture is very small, as long as the standard basic fracture moment is exceeded.

Therefore, off-road vehicles often do not use aluminum alloy wheels. Occasionally flying will easily cause the wheel to break, but again, the possibility of such a situation is very small for off-road domestic vehicles. The wheels of this material can meet various paved and normal non-paved roads. road commuting. What to do if the original Mazda hub is deformed If the hub of the car is bent, broken or severely corroded, it should be replaced in time. If damaged wheels are not replaced, the tires are likely to slip off the wheels and the car may even lose control.

But if it's just scratches, it's not a big deal. Do not change the wheel size at will. If you change it at will, it will definitely damage the original data of the vehicle.

After blindly refitting, not only the fuel consumption of the vehicle will increase, but also the power and braking effect will be affected, so be careful to replace it. Find a professional auto parts store to replace the car wheels. Generally, when car owners replace the wheels, most of the original wheels will be enlarged and widened to make full use of the advantages of wide tires and increase comfort and grip.