What is the decoration effect of modern spinning wheels? The material development of ordinary car wheels is not ordinary pig iron, but steel with a carbon content of 2.0% or less; but the proportion of pig iron is as high as 2.0% to 4.5%, so in mechanical design, two different materials There is a large gap in strength and toughness. However, even steel is not very strong. For example, body A-pillars made of hot-formed steel with a yield strength of up to 1,500 MPa may still bend in a crash.
Therefore, the compression ability of the steel wheel hub is relatively weak, that is to say, it is relatively simple and easy to deform. Adhering to the principle of "technical innovation, quality first, customer first", we are actively exploring new markets. The company now integrates production, scientific research and sales. With the continuous expansion of domestic and foreign markets, the company will expand its production capacity in a timely manner to meet the diverse needs of customers. We can provide services according to customer requirements for product style, structure and function.
Adhere to the spirit of pioneering and enterprising, hard work and enterprising, introduce high-tech talents at home and abroad, accumulate years of industry experience, have fully automated, high-tech, high-energy-saving technologies, and introduce international management mechanisms, a management team composed of experts, and research and development, production, management team. Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking. In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving.
Check for scars. If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt. When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar.
Use the brush tip to apply topcoat to the damaged parts of the car hub. After drying, it shrinks slightly. What is the decoration effect of modern spinning wheels? When the surface of the car wheel is worn by hard objects, the air can directly contact the aluminum, oxidize at the damaged part first, and then gradually spread to the surrounding area for future use.
Oxidation of car wheels is usually caused by corrosive chemical products. Remove dust and debris, get clean alloy wheels from the store, and avoid acidic detergents. Mix the right amount of water and detergent in a bucket.
Sponge soaked in detergent and bucket. Squeeze the sponge bucket to avoid wasting detergent. Wipe the wheels with a sponge.
The company takes "innovation, energy saving, firmness and safety" as its quality premise. Adhere to the development concept of "beyond lightweight and serve the world". To make the impossible possible, to create extraordinary qualities.
Get higher returns with less investment. What is the decorative effect of modern spinning wheels? The density of steel is significantly higher than that of aluminum alloy building materials, which is why aluminum alloys have been used for lightweight automobile chassis in my country; automobile wheels are "non-sprung parts". If the unsprung mass cost is too large, it will inevitably affect the work performance, handling performance and actual fuel consumption.
Just like a car hub, the weight loss of the hub is a direct result of the controlled torque output of the engine; because the powertrain transmitted to the wheel via the half shaft needs to be able to overcome the priority thing is the mass of the wheel (weight/drag during operation) , so the power at the hub of the car needs to be synchronized and can be lowered. The company always adheres to independent research and development, technological innovation, adheres to the business philosophy of product quality and high quality, and has perfect quality conditions and testing capabilities. The strict control and continuous improvement of the product processing process provide customers with a good guarantee of high-quality and reliable products.
Based on the enterprise spirit of "integrity, pragmatism, innovation and win-win", the company is willing to provide customers with high-quality products and services. The company has a high-quality workforce and a strong management team, and has the ability to build an advanced enterprise with research and development capabilities. In fact, it's not necessarily because aluminum alloys are much weaker than steel.
In order to ensure strength, the volume of aluminum alloy wheels is very large. So, in general, traditional alloy wheels don't have to be lighter. Even many spare tires have steel rims, which are lighter than aluminum rims (full size).
The real weight advantage is those forged wheels. Because the forging process improves the strength, the volume can be reduced, reflecting the weight advantage. If your spare tire is a full-size steel wheel, you can check whether it is an aluminum alloy wheel or a steel wheel.
What is the decorative effect of modern spinning wheels? Many people think that as long as the car wheels are installed without touching the outer metal plate, in fact, when disassembling the wheels, if you look carefully at the structure inside, it is easy to get stuck in many places, especially after the car is started. On rough roads, the shock absorbers compress momentarily. Therefore, make good use of large wheels. You must drive beautifully.
Also pay attention to the width of the rim. Second, the brake calipers snap onto the rim. Because cars these days often use large calipers for safety, a 4lb caliper is much bigger than a can.
Underbiased and poorly designed wheels often get stuck on the brake calipers. Fortunately, it's easy to spot in this case.