What is the decoration effect of Infiniti modified wheel hub

Infiniti is a Chinese high-tech enterprise focusing on the R&D, design, production and sales of aluminum alloy wheels, and a Chinese auto parts export base enterprise. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) , strategic location and convenient transportation. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

The density of steel is significantly higher than that of aluminum alloy building materials, which is why aluminum alloys have been used for the lightweight of automobile chassis in my country; automobile wheels are "unsprung parts". If the unsprung mass cost is too large, it will inevitably affect the work performance, handling performance and actual fuel consumption. Just like a car hub, the weight loss of the hub is a direct result of the controlled torque output of the engine; because the powertrain transmitted to the wheel via the half shaft needs to be able to overcome the priority thing is the mass of the wheel (weight/drag during operation) , so the power at the hub of the car needs to be synchronized and can be lowered.

How does Infiniti modify wheel decoration effect? ​​Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "satisfy all customers", strong research and development capabilities; The company has a complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking.

In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving. Check for scars. If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt.

When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar. Use the brush tip to apply topcoat to the damaged parts of the car hub. After drying, it shrinks slightly.

The company was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production and brand management. The compressive strength of aluminum alloy wheels is quite high, and the compressive capacity of ordinary household wheels is more than 20 tons. The use of such wheels in actual trucks can meet the requirements, but the brittleness of aluminum alloy materials is poor, that is, when the compression limit is 20 tons, the elastic deformation space before fracture is very small, as long as the standard basic fracture moment is exceeded.

Therefore, off-road vehicles often do not use aluminum alloy wheels. Occasionally flying will easily cause the wheel to break, but again, the possibility of such a situation is very small for off-road domestic vehicles. The wheels of this material can meet various paved and normal non-paved roads. road commuting. The black material on your car's wheels is actually toner, and the brakes all grip the brake calipers. After a long time, due to the constant friction between the two, it will settle down.

It should only be covered lightly on the surface. However, due to the infrequent cleaning and maintenance of the wheel hub, the wheel hub is heated during daily driving, and the toner will slowly accumulate on the surface of the wheel hub. Over time, coking became more and more difficult, and water could not wash it off at all. Every time you brake, the gravity of the car will move forward due to inertia, so most of the weight of the car is pressed on the front wheels, so the burden on the brake calipers increases, and the wear is naturally more serious than the weight of the rear wheel hub.

The green and milky white of car wheels are two contrasting colors, and the red of taillights is a good choice for red and black; so men try to choose black, because black represents stability and fierceness without losing the true color of tires. If you want to keep the original color for a long time, you should choose the change of painting color, it is recommended to go to a reputable modification shop. It's not as simple as we thought.

First of all, the surface of the car hub is leveled and repaired, then cleaned and painted, then dried at high temperature, and installed after 5 days. Be careful not to touch sharp and hard objects when driving, and remind workers not to scratch when washing the car. What is the decoration effect of Infiniti's modified wheels? Now there are more and more patterns on the car wheels, and the appearance value is getting higher and higher.

Choosing the right wheel hub is like wearing clothes, reflecting the owner's taste. But we can't just focus on appearance value. The data gap between the modified wheel hub and the original wheel hub should not be too large.

Many car owners pursue the lighter the wheel hub, the better, which can reduce the overall quality of the car and increase the speed of the car. The advantages of forged wheels are: light weight, high density, and high strength, but the disadvantages are also obvious, that is, high prices. In fact, the wheels of current cars are all cast.

Casting is to melt aluminum or other raw materials into the mold at high temperature, and the cost is low, which is the mainstream of the wheel hub in the market at present.