Custom one piece rims manufacturers | JWHEEL
  • Custom one piece rims manufacturers | JWHEEL

Custom one piece rims manufacturers | JWHEEL

The product has a long operation life and can be held up for a long time. Thus, it is proved that this quality product has won high recognition in the market for its durability.
Products Details
  • Feedback
  • JWHEEL has developed to be a professional manufacturer and reliable supplier of high-quality products. Throughout the whole production process, we strictly implement the ISO quality management system control. Since established, we always adhere to independent innovation, scientific management, and continuous improvement, and provide high-quality services to meet and even exceed customers' requirements. We guarantee our new product one piece rims will bring you a lot of benefits. We are always standby to receive your inquiry. one piece rims We will do our best to serve customers throughout the whole process from product design, R&D, to delivery. Welcome to contact us for further information about our new product one piece rims or our company.Jiangmen Jiangjin Technology and Culture Co. Ltd. is a reliable supplier of one piece rims with top quality and reasonable price.

    Describe
          

         

               
          

    The ET value is the Off-set value, the deviation of the wheel mounting surface from the center line of the wheel rim. Off-set is defined as the distance between the rim's mounting surface and the center of the rim, with Positive Offset in the outward direction and Negative Offset in the inward direction of the rim.

                                 

                   

    PCD is the pitch center diameter, which is the diameter of the circumference of the CIRCLE centered on the wheel and surrounded by several screw holes, as well as the number of the holes


                           

    Spoke is a device to protect the wheel rim and spokes of the vehicle wheel, the diameter size of the cover plate is close to the diameter size of the wheel rim, the center of the cover plate has a hole larger than the wheel rotation axis, and there is a hole in the part of the cover plate near the edge, and the edge of the cover plate has a ring-shaped wheel plate, and the surface of the wheel plate can fit closely with the surface of the wheel rim    


    The rim, commonly known as the wheel rim, is the part of the wheel around which the tire is mounted. Its nominal width and nominal diameter are expressed in inches. The linkage symbol in the middle (* or -) indicates whether the rim is integral or not.

    Shop for Business
    66 Available Coupon
    Shop for Business
    66 Available Coupons
    Shop for usiness
    66 Available Coupons
    Exhibition

    Color Matching


                     
                     

    Polish:

    Gross Black

    Polish:

    Matte Black

    Polish:

    Flash Silver Gun Metal

    Polish:

    Tanzannian sapphire blue

    Polish:

    Gross Bronze

    Brush:

    Candy Red Clear Coat

    Brush:

    Brown Clear Coat

    Brush:

    Blue Clear Coat

    Brush:

    Bronze Clear Coat

    Brush:

    Blue Black Clear Coat

    Our Advantages

    1. Large production capacity:12000 Pieces per Day

    2. Very competitive prices: We are always aim to occupy more marketing under best reasonable pricing.

    3. Strict Quality Control: Our QC operation is strictly conducted in ISO9001, to ensure the good quality items to our customers.

    4. High product consistency:Large-scale automated production. 

    5. Company development: company develops steadily, has 30 years’history.

    6. We can provide you with all types of wheels and accessories without any intermediary, which means lowest costs and competitive price in the market.

    7. We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of "low-pressure casting + spinning". We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers' needs and lead the industry development.

    8. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating and We have formed a complete testing system from the incoming inspection of raw materials to the factory inspection of finished products, and our testing capabilities range from material and performance to dimensional and impact and fatigue testing, and then to the testing of the coating performance of finished wheels.

    9. Our company has obtained a number of patents by virtue of its strong technical strength: Patent for a clean grinding table based on aluminum alloy wheels.

    10. Our company has been focusing on quality, management and environmental protection, and has passed. ISO 9001:2015, IATF 16949, Germany KBA, Japan VIA association ce

    Production facility


                     

                     

                     

                   
                   
                   

    JWHEEL adopts the industry's advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers.

    Automatic system


                     

                     

               

                     
                     
                     
    Testing facility
           
    1 Harmonic detection

    Full automatic wheel run out/dynamic balance testing line, suitable for wheel run out and dynamic balance detection.

    Run out test: measure the size and phase of the inner and outer radial and axial run out of the wheel.

    Dynamic balance test: measure the size and phase of unbalance on both sides.

           
    2 Impact test

      The lower the flat ratio of the tire, the higher the standard of impact resistance of the wheel. The lower the flat ratio, the greater the impact of the road towards the rim. In response to these changes, JWHEEL uses 30°and 13° impact tests to measure the wheel. (That is, radial impact test is to strike the barrel with a certain hammer weight ).

     

      The 13° impact test mainly uses a heavy hammer to impact the part where the wheel edge connected with the tire at an Angle of 13°, so as to simulate the impact that the car may go through while running on the road, for example rocks or the edge of the road. There are two criteria to measure whether the wheel should be accepted : Spokes should not have penetrating cracks, and the tire should not be completely separated from the barrel within 30 seconds.


           
    3 Salt spray test

    Salt spray test is a test that examines the corrosion resistance of the products or metal materials. It uses a salt spray test equipment that creates salt spray environment conditions to detect whether the coating of the wheel is stable, and will there be paint drop, electroplating fade, or cracking, etc.


           
    4 Helium detection

      Helium mass spectrometer is used to detect the leakage of the hub. Helium gas is used as the tracer gas. Different masses of gas will be separated according to the mass charge ratio in the mass spectrometry chamber of the mass spectrometer. Then the mass spectrogram of the tracer gas can be obtained, and the hub leakage rate can also be obtained safely, quantitatively and quickly.


           
    5 Air tightness test

      Water tightness test - bubble leak detection method. Its detection principle is to close the inner and outer side of the aluminum alloy wheel with sealing disk through external force, and then immerse the wheel and sealing disk in water, as the aluminum alloy wheel is closed, a part of the gas is compressed, resulting in the increase of the pressure of the inner cavity of the wheel. If the wheel rim has a leak hole, the compressed gas will leak out from the leak hole and form bubbles in the water.


           
    6 The X-ray detection

    No matter what kind of manufacturing method is applied, we can not completely avoid the defects that may be created during the production process. JWHEEL company will find out any unqualified hubs by X-ray detection and then do the recasting. Only 100% good hubs will be moved into the next production process. 

    The wheel, as a high-speed moving and weight support part of a vehicle, has a vital relation with the safety performance of the whole vehicle and the safety of drivers and passengers. Therefore Jwheel attaches great importance to the hub quality.

     There are a series of reasons that may cause casting wheel defects. Such as not strict enough raw material control, unreasonable production process, unreasonable mold structure design, etc. Casting defects includes bubbles, pores, inclusions and looseness, etc. As the internal defects cannot be identified by naked eyes, X-ray becomes a good way to detect the internal quality of the wheel.


           
    7 Bending test

      Bending test is to determine the solidity of the rim and spoke by simulating the stress on the wheel when the vehicle is shaking. The whole wheel is subjected to a rotational bending force. The load of the wheel in the test varies from 500 kg to 720 kg depending on the wheel parameters, and the number of rotations is not less than 100,000 revolutions according to industry standards. For the appearance of any of the following three phenomena, the test will be determined failed. (1) the wheel can not continue to bear the load (2) New visible cracks appear in any part of the wheel (3) Before reaching the required number of cycles, the offset of the loading point has exceeded 10% of the initial loading.


           
    8 Radial fatigue test

      The radial fatigue test simulates road conditions while driving. Install the hub to the tire to run for 500,000 or even 1,000,000 rotations on the test platform.


    Exhibition display


                   
                   
                   
                   

    FAQ
    • Q1: How to gurantee the wheel quality?
      A:All of our products conform to the JWL/VIA standard, undergo rigorous impact test, cornering fatigue test, radial fatigue test ; Our factory is ISO/TS16949, ISO14001 TUV SFI JWL/VIA certified.
    • Q2: How about your delivery time?
      A:From the deposit received date, we will finish production within 35-45 days. If the wheel mould is needed, it will takes 3-4 weeks longer.
    • Q3: What information should I provide for a quotation?
      A:Usually we need to know : car model and the wheel size , PCD , CB , ET(offset) ,color and order quantity to make a correct quoation for you.
    • Q4: Do you accept OEM or ODM order?
      We accept OEM, ODM with customer's logo, wheel design and packing design.
    • Q5: What's your MOQ?
      A:For our existing mould of casting wheel, MOQ is 100pcs/size/fitment, with 2 colors. if you want to make your own design, we can discuss about the MOQ. For the forged wheel, no need to open mould for new design, MOQ is 4pcs.�
    • Q6: How to deliver your wheels?
      A:We cooperate with very reliable shipping company and agent, if you dont have your own agent, we can help you and give you sug-gestions and the most economic way for shipping by sea, by train or by air, you can choose pickup wheels from the nearest port or at your shop.
    • Q7: Can you produce according to the samples?
      A:Yes, we can produce according to your samples or technical drawings.





    The production of JWHEEL  is eco-friendly and does not generate any water, air or noise pollution. And the cleaning process guarantees it is meticulously cleaned and free of dust and odor.

    FAQ

    1.Q: Why choose us?
    A: 1. Lowest factory price with good quality. 2. Low MOQ. 3. On-time delivery. 4. Welcome to visit our factory ,our machine and our workshop will help us speak more.
    2.Q: Where’s your factory ?
    A: My company is in Jiangmen City, just need 1 hour from GuangZhou BaiyunStation to our factory.
    3.Q: Do you support OEM/ODM ?
    A: Yes, OEM/ODM is ok, the size, color ,ET,J, PCD ,all can be customized.

    Advantages

    1.1. The company is located in Guangdong, Hong Kong and Macao Bay Area, an important node city of Jiangmen. With modern production facilities, we adopt the industry's advanced casting, machining, painting and inspection equipment, equipped with automatic robots throughout the process, and with ERP system and other advanced management means, to create the industry benchmark for hardware, software and product quality.
    2.3. We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of "low-pressure casting + spinning". We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers' needs and lead the industry development.
    3.4. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating and We have formed a complete testing system from the incoming inspection of raw materials to the factory inspection of finished products, and our testing capabilities range from material and performance to dimensional and impact and fatigue testing, and then to the testing of the coating performance of finished wheels.
    4.2. The company adopts the industry's advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers. The company also sets up a professional team for new product development, design, mold manufacturing, trial production, testing and inspection to provide customers with technical development and support services.

    About JWHEEL

    JWHEEL science and technology is a global leading manufacturer of alloy wheels. The experience is the best protection for our customer. JWHEEL science and technology was established in 1992. After 28 years of development, it becomes a stable supplier of many famous wheel brands worldwide. The capcity goes 1.5 million piece of wheels per year. JWHEEL science and technology provides one-stop service starting from customizing R&D services, according to your drawings and samples to meet your special requirements, especially with our Flow Formed, automated coating line, helium leak detector system and automatic dynamic balance checking system. Customer care is our top priority job to provide all customers' satisfaction and trust what we work for. We believe that superior customer satisfaction comes from superior product quality.
    Product display



    Product Introduction

    JWHEEL is the top supplier of the best flow formed wheel and one-piece forged wheels, offering superior quality and durability for your vehicle.

    Product IntroductionIf you desire unrivaled performance on the roads, JWHEEL's best flow formed wheel, the ultimate masterpiece in the industry, is the answer you seek. Crafted meticulously with a single piece forged design, this wheel epitomizes strength, durability, and agility like no other. Unleash your vehicle's potential with JWHEEL's exceptional precision engineering and cutting-edge technology. Say goodbye to compromise as these wheels transcend boundaries, effortlessly elevating your driving experience to new heights. Engineered to perfection, these one piece forged wheels will command attention, enhancing your vehicle's aesthetics while simultaneously delivering unparalleled performance. Stay ahead of the crowd and choose JWHEEL for a timeless driving sensation.

    Company Advantages

    Welcome to JWHEEL, your premier destination for the best flow formed wheel and 1 piece forged wheels. With a commitment to excellence and a passion for innovation, we are proud to be your trusted supplier in the automotive industry.

    At JWHEEL, we understand that superior performance and impeccable style are essential for any discerning car enthusiast. That's why we offer a wide range of top-quality flow formed wheels and 1 piece forged wheels to elevate your driving experience to new heights. Our wheels are meticulously crafted using state-of-the-art technology and precision engineering, ensuring unrivaled strength, durability, and aesthetics.

    As a leading supplier in the industry, we take great pride in delivering products that exceed expectations. We work closely with renowned designers and engineers to stay at the forefront of wheel manufacturing. Our team is dedicated to pushing boundaries and setting new standards in performance, design, and craftsmanship.

    At JWHEEL, we believe that customization is the key to personalizing your vehicle. That's why we offer an extensive selection of finishes, sizes, and styles to suit your unique taste and specific requirements. Whether you prefer a sleek matte black finish or a bold chrome look, our wheel options are designed to turn heads and make a statement.

    We are not just a supplier; we are your trusted partner in enhancing your driving experience. Our team of knowledgeable professionals is committed to providing exceptional customer service every step of the way. We are here to guide you through the selection process, answer any questions you may have, and ensure a seamless experience from purchase to delivery.

    Choose JWHEEL as your go-to source for the best flow formed wheel and one piece forged wheels. Join our community of passionate car enthusiasts and elevate your ride to its full potential. Explore our collection today and unlock a world of style, performance, and unforgettable moments on the road.

    Basic Information
    • Year Established
      --
    • Business Type
      --
    • Country / Region
      --
    • Main Industry
      --
    • Main Products
      --
    • Enterprise Legal Person
      --
    • Total Employees
      --
    • Annual Output Value
      --
    • Export Market
      --
    • Cooperated Customers
      --
    Send your inquiry
    Chat with Us

    Send your inquiry

    Choose a different language
    English
    ภาษาไทย
    Nederlands
    हिन्दी
    한국어
    日本語
    العربية
    Português
    italiano
    русский
    français
    Deutsch
    Español
    Current language:English