What is In high temperatures, these are some hidden car care tips you must get? | JWHEEL

In high temperatures, there are hidden things in car life that can be easily overlooked, and paying attention to them will make your driving safer! Follow JWHEEL to count the things you've overlooked!

March 08, 2023
What is In high temperatures, these are some hidden car care tips you must get? | JWHEEL


In high temperatures, these are some hidden car care tips you must get

In high temperatures, there are hidden things in car life that can be easily overlooked, and paying attention to them will make your driving safer! Follow JWHEEL to count the things you've overlooked!



  1. 1.Choose the right grade of petrol

Some consumers are not aware of the performance of higher grade petrol and do not choose petrol based on the compression ratio of the car engine. The industry has repeatedly pointed out that the damage caused by excessive oil use is not obvious in the short term, but will directly shorten the life of the car over time.

In the long term, 60% of scrapped cars are caused by using the wrong oil, especially in the summer when the damage is more obvious. So choosing the right petrol carefully is part of car maintenance! Usually there is a warning on the fuel cap about the appropriate petrol grade, so follow your vehicle's instructions.


2.Keep your lubricants from deteriorating

High temperatures also place certain demands on lubricants. For example, engines working at high temperatures for long periods of time can transfer heat to the lubricant, which can lead to oxidation and deterioration of the lubricant, affecting its lubrication function.

Lubricants play a vital role in the normal operation of engines, and the long-term use of poor quality or deteriorated lubricants can lead to oil circuit gumming and oil alarms, or serious accidents such as cylinder pulling, tile burning and shaft holding. This is why it is essential to replace deteriorating lubricants in time for the summer heat.

3.Antifreeze is essential in hot weather

If you think that antifreeze is only used in winter and can be replaced by water in summer, then you are very wrong. Experts clearly point out that antifreeze must also be used in summer.

A good antifreeze not only has the function of cooling the engine, but also has good resistance to low and high temperatures, and even has the function of anti-corrosion and rust removal. In addition, the boiling point of antifreeze is above 120 degrees Celsius, while the boiling point of water is only 100 degrees Celsius, so the use of antifreeze can prevent your car from "boiling" in the summer. Secondly, water instead of antifreeze is prone to limescale and needs to be replaced regularly, whereas antifreeze has no such concerns!


4.On tyre pressure

At the same time, speeding and emergency braking after overloading are also important factors that can cause a tyre blowout. Therefore, it is necessary to reduce the tyre pressure or change the tyre to helium with more stable physical properties, as well as routine wheel inspection and maintenance.


  Jwheel, as an professional wheel manufacturer, concentrates in R&D and manufacturing of aluminum alloy wheels, including casting wheels, forging wheels and flow-form wheels. The products of it have passed the certifications of SEI、SEMA,VIA, JWL, JWL-T, TUV and so on. Since establishment, Jwheel has been developing steadily, with rich experience of designing and producing aluminum alloy wheels. It has earned the appreciation of both domestic market and foreign market with its high technology, good quality and customer service. It provided OEM service to many international brands like Vossen, OE Wheel, TSW, Rays, ProLine, Oxygen, AUTEC, etc., and it also provide ODM service, that is, for producing a new wheel, you can just provide a sketch, drawing or picture, and then Jwheel will finish the rest parts. By the way, the MOQ of forging wheels is four. (For more information, just go to the website:


J118-16    16X6.5    25/38/45/52    100-114.3*4H/5H    60.1/67.1/73.1    MC66AR/MCAP    

J118-20    20X8.5    33-45    100/114.3*5H    65/73.2    MC/MCAP/H    


Guangdong Guangchuan Auto Parts Trading Co., Ltd. has become a model of the  industry's brand production companies.


1.Q: What kinds of method do you use to put customized logo?
A: Silk screen printing. Laser engraving. Stamping.
2.Q: What’s your payment method?
A: T/T , L/C.
3.Q: Where’s your factory ?
A: My company is in Jiangmen City, just need 1 hour from GuangZhou BaiyunStation to our factory.


1.The company is located in Guangdong, Hong Kong and Macao Bay Area, an important node city of Jiangmen. With modern production facilities, we adopt the industry's advanced casting, machining, painting and inspection equipment, equipped with automatic robots throughout the process, and with ERP system and other advanced management means, to create the industry benchmark for hardware, software and product quality.
2.The company adopts the industry's advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers. The company also sets up a professional team for new product development, design, mold manufacturing, trial production, testing and inspection to provide customers with technical development and support services.
3.We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of "low-pressure casting + spinning". We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers' needs and lead the industry development.
4.The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating and We have formed a complete testing system from the incoming inspection of raw materials to the factory inspection of finished products, and our testing capabilities range from material and performance to dimensional and impact and fatigue testing, and then to the testing of the coating performance of finished wheels.


Guangdong Guangchuan Auto Parts Trading  has its first plant established in 1993. After over 29 years’ development, Guangchuan Auto Parts Trading has become a world-leading supplier for many international famous wheel brands. Guangchuan Auto Parts Trading has an annual production capacity of 1.5 million and it provides one-stop solution for design and manufacturing. It’s equipped with advanced production facilities such as aluminum alloy melting furnace, casting production line, spinning and forging equipment, automatic painting line, helium leak detection system and automatic dynamic balance inspection system.

Basic Information
  • Year Established
  • Business Type
  • Country / Region
  • Main Industry
  • Main Products
  • Enterprise Legal Person
  • Total Employees
  • Annual Output Value
  • Export Market
  • Cooperated Customers
Chat with Us

Send your inquiry

Choose a different language
Current language:English