Which Mazda original wheel manufacturer is good?

Which Mazda original wheel manufacturer is a high-tech enterprise in my country focusing on R&D, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) Office), the geographical position is superior and the transportation is convenient. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

If the original 17-inch car wheels want to change to a larger size, such as 18-inch wheels, the corresponding value will be higher. According to the formula, the diameter difference between old and new tires should be controlled at about 3% to ensure driving safety. As a result, optional tires will be wider and have thinner natural sidewalls.

If you don't mind the increase in fuel consumption and think the larger size is more appealing, there are a lot of things you should be aware of when driving after buying. Because the car hub is relatively large, the tire is relatively wide, and the tire wall is relatively thin, so if you do not pay attention, the probability of a bulge or a flat tire will be much higher than that of a small wheel hub. Based on the principle of technological innovation and independent research and development, which good company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "satisfy all customers", strong research and development Ability; the company has a complete and scientific quality management system.

The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". The green and milky white of car wheels are two contrasting colors, and the red of taillights is a good choice for red and black; so men try to choose black, because black represents stability and fierceness without losing the true color of tires. If you want to keep the original color for a long time, you should choose the change of painting color, it is recommended to go to a reputable modification shop.

It's not as simple as we thought. First of all, the surface of the car hub is leveled and repaired, then cleaned and painted, then dried at high temperature, and installed after 5 days. Be careful not to touch sharp and hard objects when driving, and remind workers not to scratch when washing the car.

Mazda original wheel manufacturer which good company was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, production scale and brand management. Compared with steel wheels, aluminum alloy wheels have obvious advantages: low density, about 1/3 of steel wheels, which means that aluminum wheels with the same volume will be 2/3 lighter than steel wheels. Statistics show that if the vehicle quality is reduced by 10%, the fuel efficiency can be increased by 6% to 8%.

Therefore, the promotion of aluminum alloy wheels is of great significance to energy saving, emission reduction and low-carbon life. The thermal conductivity of aluminum is higher than that of steel, so under the same conditions, the heat dissipation performance of aluminum alloy wheels is better than that of steel wheels. Wheels are divided into aluminum alloy wheels and steel wheels, and aluminum alloy wheels are divided into forging and casting.

The fatigue strength and bending strength of forged aluminum alloy wheels are much higher than those of steel wheels. Under the same environment, the heat dissipation coefficient of aluminum alloy wheels is three times that of steel wheels, and the maximum bearing capacity of forged aluminum alloy wheels is five times that of steel wheels. Aluminum alloy wheels have the characteristics of light weight, tire saving, beautiful appearance and so on. At the same time, the safety of forged aluminum alloy wheels is much higher than that of steel rings.

According to JIT standards, when the vehicle hits the threshold at 50 km/h, only the forged aluminum alloy wheels can keep running. When the temperature of the car hub is high, it should be allowed to cool naturally before cleaning. Do not wash it with cold water, otherwise it will damage the aluminum alloy wheel hub, and even deform the brake disc, which will affect the braking effect.

In addition, cleaning the aluminum alloy wheel with a high-temperature cleaning agent will cause a chemical reaction on the surface of the car wheel, which will lose its luster and affect the appearance. If the hub of the car is bent, broken or severely corroded, it should be replaced in time. If damaged car wheels are not replaced, the tires are likely to slip off the car wheels, and the car may even lose control.

But if it's just scratches, it's not a big problem. Mazda original wheel hub manufacturer Which is good? The material development of ordinary car hubs is not ordinary pig iron, but steel with a carbon content of 2.0% or less; but the proportion of pig iron is as high as 2.0% to 4.5%, so in mechanical design, the two are different There is a large gap in the strength and toughness of materials. However, even steel is not very strong.

For example, body A-pillars made of hot-formed steel with a yield strength of up to 1,500 MPa may still bend in a crash. Therefore, the compression ability of the steel wheel hub is relatively weak, that is to say, it is relatively simple and easy to deform.