What to do if the car spinning wheel hub is deformed

What to do if the car spinning wheel is deformed is a high-tech enterprise in my country that focuses on the research and development, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) Office), the geographical position is superior and the transportation is convenient. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

Prepare the color according to the original color of the rim, and choose different types of sandpaper for grinding according to the degree of damage. We need to repaint the car rim. But before painting, we tried to use waste newspapers to isolate the edge of the wheel hub to prevent the spray paint from splashing on the tires. Put it in the equipment at 100-120℃ to dry for 60 minutes, then grind it again to a matte finish.

If it still feels a little hairy, you can continue to smooth it with sandpaper. Cover the rim with a universal shielding film, wipe the surface of the rim with a degreaser, dry it with equipment, and wipe the surface dust with a dustproof cloth. The company has accumulated years of production experience in line with the principles of technological innovation and independent research and development, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "to satisfy all customers", strong research and development Ability; the company has a complete and scientific quality management system.

The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". When the surface of the car hub is worn by hard objects, the air can directly contact the aluminum, oxidize at the damaged part first, and then gradually spread to the surrounding area for oxidation in the future. Oxidation of car wheels is usually caused by corrosive chemical products.

Remove dust and debris, get clean alloy wheels from the store, and avoid acidic detergents. Mix the right amount of water and detergent in a bucket. Sponge soaked in detergent and bucket.

Squeeze the sponge bucket to avoid wasting detergent. Wipe the wheels with a sponge. The company was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with serialization of products, large-scale production and brand management.

Slight deformations are not visible to the naked eye, and deformations are not visible inside car wheels. At this time, when driving fast, the steering wheel shakes, indicating that the wheel hub of the car may be deformed, and it is time to balance it. Hub flanges are divided into inner flanges and outer flanges.

The outer flange is visible, but the inner bridge is not. However, when getting out of the car at high speed, you can pay attention to whether there is vibration in the steering wheel or whether the tire is leaking. If there is one of these two cases, it must be deformed.

If the hub of a car is cracked in a big pit, it will definitely be deformed. At this time, it is necessary to repair the deformation when repairing the crack. When the vehicle is moving forward, it presses down on a hard, sharp object that is higher than the distance between the outer edge of the car's wheel hub and the ground, and is located on the outer edge of the tire.

When the tire was pressed against the object, the sharp corner of the object just hit the outer edge of the tire, piercing the fragile outer edge of the tire (this would explain the radial fracture of the tire). After a tire blows out, it immediately loses its cushioning ability. A hard object hit the hub directly, causing the hub to break near the edge of the valve (this would explain the defect in the edge of the hub).

It then causes the entire hub to break. Or when the hub encounters a large pit, it will pass quickly, exceeding the bearing range of the hub, resulting in fracture. Aluminum alloy wheels are light in weight (about 2kg less than aluminum or steel wheels of the same specification), high manufacturing precision, small deformation during high-speed rotation, and anti-inertia.

This is conducive to improving the straight-line driving performance of the vehicle, reducing the rolling resistance of the tire, thereby reducing fuel consumption, reducing the weight and weight of the vehicle; the heat dissipation is good, and the heat of the brake can be released in time to avoid the decline of brake heat dissipation and affect driving safety. Aluminum alloy is relatively brittle, prone to small cracks, not easy to be found, not as strong as steel, may have sand holes during casting, tubeless tires are easy to run flat, and the price is relatively high. What to do if the car spinning wheel is deformed Coating the car wheel In order to enhance the external beauty of the aluminum alloy wheel and protect the environment, the traditional painting process and electroplating process will be gradually reduced and replaced by water-based powder coating technology.

After polishing and spraying transparent powder, the appearance of bright metal hub can replace electroplating. Coated wheels are not only colorful, but also environmentally friendly and exquisite, which can meet your needs to a large extent. Brushing is a means of surface treatment, through the grinding of products to form lines on the surface of the workpiece, so as to play a decorative role, because this tire seems to have two colors, and the surface is shiny, which is also one of the important factors for car owners to choose wheel brushing one.