The density of steel is significantly higher than that of aluminum alloy building materials, which is why aluminum alloy has been used for lightweight automobile chassis in my country; automobile wheels are "non-sprung parts". If the unsprung mass cost is too large, it will inevitably affect the work performance, handling performance and actual fuel consumption. Just like a car hub, the weight loss of the hub is a direct result of the controlled torque output of the engine; because the powertrain transmitted to the wheel via the half shaft needs to be able to overcome the priority thing is the mass of the wheel (weight/drag during operation) , so the power at the hub of the car needs to be synchronized and can be lowered.
The company takes "survival by quality, market by reputation, development by science and technology, and efficiency by management" as its business purpose. In order to ensure that every wheel hub can do better, the company has built a strict quality monitoring and testing system. , Products have passed TS16949 quality system certification. The products include cast wheels and forged wheels. The annual output of casting wheels reaches about 1.1 million pieces, and the annual output of forged wheels reaches about 18,000 pieces. The products not only cover nearly 30 provinces, municipalities and autonomous regions in China, but also are exported to the United States, Russia, Southeast Asia, and the Middle East. , Japan, Singapore, Iraq and other dozens of regions. In order to meet the market demand, the company is still constantly reforming and innovating, improving management level, improving product quality, giving full play to the company's technical advantages, brand advantages, talent advantages and customer advantages in the industry, and striving to build the company into a competitive and competitive company in the industry. An enterprise with influence and development potential.
What should I do if the modified wheel hub is deformed? Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking. In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving. Check for scars.
If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt. When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar. Use the brush tip to apply topcoat to the damaged parts of the car hub.
After drying, it shrinks slightly. Over the years, all employees of the company have been determined to forge ahead, and the technology and equipment have been continuously improved, forming a full-coverage aluminum alloy wheel forging business. In order to adapt to the development of the market, a group of technical and management talents have been trained, and a good market reputation has been formed. It will develop in the direction of "higher and farther" and better serve the majority of car owners and the society.
What should I do if the modified wheels of the public are deformed? To enhance the external beauty of aluminum alloy wheels and protect the environment, the traditional painting process and electroplating process will be gradually reduced and replaced by water-based powder coating technology. After polishing and spraying transparent powder, the appearance of bright metal hub can replace electroplating. Coated wheels are not only colorful, but also environmentally friendly and exquisite, which can meet your needs to a large extent.
Brushing is a means of surface treatment, through the grinding of products to form lines on the surface of the workpiece, so as to play a decorative role, because this tire seems to have two colors, and the surface is shiny, which is also one of the important factors for car owners to choose wheel brushing one. The company has a management team with excellent technology and rich management experience, adheres to the corporate philosophy of "customer first", builds core competitiveness, gives full play to comprehensive advantages, strives for progress in stability, and creates an excellent brand in the alloy wheel industry, so that strong quality and fashion peers. In fact, it's not necessarily because aluminum alloys are much weaker than steel.
In order to ensure strength, the volume of aluminum alloy wheels is very large. So, in general, traditional alloy wheels don't have to be lighter. Even many spare tires have steel rims, which are lighter than aluminum rims (full size).
The real weight advantage is those forged wheels. Because the forging process improves the strength, the volume can be reduced, reflecting the weight advantage. If your spare tire is a full-size steel wheel, you can check whether it is an aluminum alloy wheel or a steel wheel.
When the temperature of the car hub is high, it should be allowed to cool naturally before cleaning. Do not wash it with cold water, otherwise it will damage the aluminum alloy wheel hub, and even deform the brake disc, which will affect the braking effect. In addition, cleaning the aluminum alloy wheel with a high-temperature cleaning agent will cause a chemical reaction on the surface of the car wheel, which will lose its luster and affect the appearance.
If the hub of the car is bent, broken or severely corroded, it should be replaced in time. If damaged car wheels are not replaced, the tires are likely to slip off the car wheels, and the car may even lose control. But if it's just scratches, it's not a big deal.
What should I do if the modified wheels are deformed? First of all, the aluminum alloy wheels are lighter than the iron wheels, so the four wheels together will be much lighter than the iron wheels. If the car is driven at high speeds, it will basically be lighter and more fuel efficient. Secondly, generally speaking, aluminum alloy wheels are equipped with disc brakes.
This kind of brake needs to dissipate heat to the ventilation disc, and the aluminum alloy material of the aluminum alloy wheel hub also has a large mesh, so the heat dissipation effect will be better. Alloy wheels would look even better. First of all, iron hubs are cheap, and now iron hubs are pressed.
And it is basically the same mold, the pattern on the hub has not changed, so it is cheaper.