How to replace Chery forged wheels

How to replace the Chery forged wheel hub When the car hub turns against the edge of the road, it is easy to damage the outer edge of the wheel hub. In this case, the main structure has not changed, so the safety performance of the hub is basically not affected, as long as it is repaired. Blasting to clean dirt, sanding, putty filling, fine sanding and painting.

After these repair steps, the hub is basically brand new. The wheel hub is made of aluminum alloy, and the metal has poor fatigue resistance. After it is deformed under the action of external force, it is forced to return to its original state by external force.

Even if there are tiny cracks on the surface, the metal structure here is completely different from ordinary wheels from a scientific point of view. The company takes "survival by quality, market by reputation, development by science and technology, and efficiency by management" as its business purpose. In order to ensure that every wheel hub can do better, the company has built a strict quality monitoring and testing system. , Products have passed TS16949 quality system certification. The products include cast wheels and forged wheels. The annual output of casting wheels reaches about 1.1 million pieces, and the annual output of forged wheels reaches about 18,000 pieces. The products not only cover nearly 30 provinces, municipalities and autonomous regions in China, but also are exported to the United States, Russia, Southeast Asia, and the Middle East. , Japan, Singapore, Iraq and other dozens of regions.

In order to meet the market demand, the company is still constantly reforming and innovating, improving management level, improving product quality, giving full play to the company's technical advantages, brand advantages, talent advantages and customer advantages in the industry, and striving to build the company into a competitive and competitive company in the industry. An enterprise with influence and development potential. How to replace Chery forged wheels The larger the car wheel, the lower the flatness rate, that is, the thinner the tire, the clearer the feedback on the road conditions; moreover, when turning, because the tire contact area is large, it is not easy to deform, and the grip is better, which is also a lot The reason for the large wheel sizes of sports cars and racing cars. However, the disadvantages brought by the large wheel hub cannot be ignored, because for balance, if the wheel hub size is large, the flat rate becomes lower, and the tire wall is thinner, the ride comfort will be weakened, and the relative fuel consumption will also increase. Therefore, it is not because Pricey, it has no downsides.

If you are very concerned about economy and fuel consumption, you can try to choose a smaller wheel size. Over the years, all employees of the company have been determined to forge ahead, and the technology and equipment have been continuously improved, forming a full-coverage aluminum alloy wheel forging business. In order to adapt to the development of the market, a group of technical and management talents have been trained, and a good market reputation has been formed. It will develop in the direction of "higher and farther" and better serve the majority of car owners and the society.

How to replace the Chery forged wheel hub Many people think that as long as the car hub does not touch the outer metal plate when installing it, in fact, when disassembling the wheel, if you look carefully at the structure inside, it is easy to get stuck in many places, especially after the car starts, on rough roads On, the shock compresses momentarily. Therefore, make good use of large wheels. You must drive beautifully.

Also pay attention to the width of the rim. Second, the brake calipers snap onto the rim. Because cars these days often use large calipers for safety, a 4lb caliper is much bigger than a can.

Underbiased and poorly designed wheels often get stuck on the brake calipers. Fortunately, it's easy to spot in this case. The company has a management team with excellent technology and rich management experience, adheres to the corporate philosophy of "customer first", builds core competitiveness, gives full play to comprehensive advantages, strives for progress in stability, and creates an excellent brand in the alloy wheel industry, so that strong quality and fashion peers.

When the vehicle is moving forward, it presses down on a hard, sharp object that is higher than the distance between the outer edge of the car's wheel hub and the ground, and is located on the outer edge of the tire. When the tire was pressed against the object, the sharp corner of the object just hit the outer edge of the tire, piercing the fragile outer edge of the tire (this would explain the radial fracture of the tire). After a tire blows out, it immediately loses its cushioning ability.

A hard object hit the hub directly, causing the hub to break near the edge of the valve (this would explain the defect in the edge of the hub). It then causes the entire hub to break. Or when the hub encounters a large pit, it will pass quickly, exceeding the bearing range of the hub, resulting in fracture.

If the original 17-inch car wheels want to change to a larger size, such as 18-inch wheels, the corresponding value will be higher. According to the formula, the diameter difference between old and new tires should be controlled at about 3% to ensure driving safety. As a result, optional tires will be wider and have thinner natural sidewalls.

If you don't mind the increase in fuel consumption and think the larger size is more appealing, there are a lot of things you should be aware of when driving after buying. Because the car hub is relatively large, the tire is relatively wide, and the tire wall is relatively thin, so if you do not pay attention, the probability of a bulge or a flat tire will be much higher than that of a small wheel hub. How to replace Chery forged wheels In order to ensure the safety and reliability of the vehicle to a large extent, no matter how old the vehicle is, it is necessary to check the car wheels frequently, and pay attention to whether there are early warning signs of wear, including friction noise or suspension when turning Unusual deceleration when combined wheel turns.

If you hear car wheel bearing noise, first, it is important to find out where the noise is coming from. Many moving parts may create noise, or some rotating parts may be in contact with non-rotating parts. If it is confirmed that the bearing is noisy, the bearing may be damaged and needs to be replaced.

Since the failure conditions of the bearings on both sides caused by the front hub are similar, even if only one bearing is damaged, it is recommended to replace it in pairs.