How to replace BMW original wheel hubs Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking. In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving. Check for scars.
If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt. When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar. Use the brush tip to apply topcoat to the damaged parts of the car hub.
After drying, it shrinks slightly. The company takes "survival by quality, market by reputation, development by science and technology, and efficiency by management" as its business purpose. In order to ensure that every wheel hub can do better, the company has built a strict quality monitoring and testing system. , Products have passed TS16949 quality system certification. The products include cast wheels and forged wheels. The annual output of casting wheels reaches about 1.1 million pieces, and the annual output of forged wheels reaches about 18,000 pieces. The products not only cover nearly 30 provinces, municipalities and autonomous regions in China, but also are exported to the United States, Russia, Southeast Asia, and the Middle East. , Japan, Singapore, Iraq and other dozens of regions.
In order to meet the market demand, the company is still constantly reforming and innovating, improving management level, improving product quality, giving full play to the company's technical advantages, brand advantages, talent advantages and customer advantages in the industry, and striving to build the company into a competitive and competitive company in the industry. An enterprise with influence and development potential. How to replace BMW original wheels The green and milky white of the car wheels are two contrasting colors, and the red taillights are a good choice for red and black; so men try to choose black, because black represents stability and fierceness without losing the true color of the tires. If you want to keep the original color for a long time, you should choose the change of painting color, it is recommended to go to a reputable modification shop.
It's not as simple as we thought. First of all, the surface of the car hub is leveled and repaired, then cleaned and painted, then dried at high temperature, and installed after 5 days. Be careful not to touch sharp and hard objects when driving, and remind workers not to scratch when washing the car.
Over the years, all employees of the company have been determined to forge ahead, and the technology and equipment have been continuously improved, forming a full-coverage aluminum alloy wheel forging business. In order to adapt to the development of the market, a group of technical and management talents have been trained, and a good market reputation has been formed. It will develop in the direction of "higher and farther" and better serve the majority of car owners and the society. How to replace BMW original wheels When the vehicle is moving forward, it will press down a hard and sharp object, which is higher than the distance between the outer edge of the car wheel hub and the ground, and is located on the outer edge of the tire.
When the tire was pressed against the object, the sharp corner of the object just hit the outer edge of the tire, piercing the fragile outer edge of the tire (this would explain the radial fracture of the tire). After a tire blows out, it immediately loses its cushioning ability. A hard object hit the hub directly, causing the hub to break near the edge of the valve (this would explain the defect in the edge of the hub).
It then causes the entire hub to break. Or when the hub encounters a large pit, it will pass quickly, exceeding the bearing range of the hub, resulting in fracture. The company has a management team with excellent technology and rich management experience, adheres to the corporate philosophy of "customer first", builds core competitiveness, gives full play to comprehensive advantages, strives for progress in stability, and creates an excellent brand in the alloy wheel industry, so that strong quality and fashion peers.
If the corrosion of the car hub is not repaired in time, the corrosion of the hub will be more serious, causing the tire to leak and shorten the service life. Timely repair after the rust of the automobile wheel hub is not only beautiful, but also increases the service life. Scratches, deformations and damages are unavoidable problems in the long-term driving of the car.
If the hub is not repaired and rebuilt in time, and if it is not dealt with for a long time, it is easy to cause traffic accidents and bring hidden dangers to the lives of yourself and your family. Wheel refurbishment will clean and reduce the rust, dirt and other pollutants on the surface of the wheel hub, which can effectively reduce the air pollution caused by vehicle driving. If the original 17-inch car wheels want to change to a larger size, such as 18-inch wheels, the corresponding value will be higher.
According to the formula, the diameter difference between old and new tires should be controlled at about 3% to ensure driving safety. As a result, optional tires will be wider and have thinner natural sidewalls. If you don't mind the increase in fuel consumption and think the larger size is more appealing, there are a lot of things you should be aware of when driving after buying.
Because the car hub is relatively large, the tire is relatively wide, and the tire wall is relatively thin, so if you do not pay attention, the probability of a bulge or a flat tire will be much higher than that of a small wheel hub. How to replace the original BMW wheels Now there are more and more patterns on the car wheels, and the appearance value is getting higher and higher. Choosing the right wheel hub is like wearing clothes, reflecting the owner's taste.
But we can't just focus on appearance value. The data gap between the modified wheel hub and the original wheel hub should not be too large. Many car owners pursue the lighter the wheel hub, the better, which can reduce the overall quality of the car and increase the speed of the car.
The advantages of forged wheels are: light weight, high density, and high strength, but the disadvantages are also obvious, that is, high prices. In fact, the wheels of current cars are all cast. Casting is to melt aluminum or other raw materials into the mold at high temperature, and the cost is low, which is the mainstream of the wheel hub in the market at present.