How much is Changan original wheel hub? One is a high-tech enterprise in my country focusing on R&D, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) , strategic location and convenient transportation. The company covers an area of 120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.
The density of steel is significantly higher than that of aluminum alloy building materials, which is why aluminum alloys have been used for the lightweight of automobile chassis in my country; automobile wheels are "unsprung parts". If the unsprung mass cost is too large, it will inevitably affect the work performance, handling performance and actual fuel consumption. Just like a car hub, the weight loss of the hub is a direct result of the controlled torque output of the engine; because the powertrain transmitted to the wheel via the half shaft needs to be able to overcome the priority thing is the mass of the wheel (weight/drag during operation) , so the power at the hub of the car needs to be synchronized and can be lowered.
Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "satisfy all customers", strong research and development capabilities; The company has a complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". Generally, the wheel hub sizes calibrated by car wheel manufacturers are: 15 inches, 16 inches, 17 inches, 18 inches and 19 inches.
The small ones usually come with family cars, while the big ones come with more advanced ones. For example, for a family car that is generally less than 150,000 yuan, the official selections are 15, 16, and 17; Although the high-configured large wheels look very sporty and enhance the appearance of the vehicle, they are not perfect.
It has both advantages and disadvantages. Changan original wheel how much is a company founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production and brand management. Car wheels play an important role in improving the appearance, but when choosing wheels, every detail must be meticulous.
The parameters of the hub will affect the use of the hub and the vehicle. If the PCD value is incorrect, it may not install properly. The ET value will not only affect installation and use, but also affect future upgrades and modifications.
When reinstalling the car hub, attention should be paid to the size of the hole. If this size is smaller than the original size, it cannot be installed naturally. However, if it is larger than the original size and no comparison measures are taken, the concentricity of the vehicle will be different when driving, resulting in abnormal noise and vibration of the vehicle, which will directly affect the vehicle in severe cases.
Automobile wheels are mainly divided into steel wheels and light alloy wheels according to their materials. Light alloy wheels are mainly made of aluminum alloy and magnesium alloy. In today's automobile market, steel wheels are rare, and most models use aluminum alloy wheels, that is, light alloy wheels. The aluminum alloy materials used to make aluminum wheels include A356, 6061, etc., among which A356 is widely used as cast aluminum wheels.
A356 aluminum alloy has the characteristics of small specific gravity and good corrosion resistance. It is mainly composed of aluminum, silicon, magnesium, iron, manganese, zinc, copper, titanium and other metal elements, and aluminum accounts for about 92%, which is a mature aluminum alloy material. When the temperature of the car hub is high, it should be allowed to cool naturally before cleaning.
Do not wash it with cold water, otherwise it will damage the aluminum alloy wheel hub, and even deform the brake disc, which will affect the braking effect. In addition, cleaning the aluminum alloy wheel with a high-temperature cleaning agent will cause a chemical reaction on the surface of the car wheel, which will lose its luster and affect the appearance. If the hub of the car is bent, broken or severely corroded, it should be replaced in time.
If damaged car wheels are not replaced, the tires are likely to slip off the car wheels, and the car may even lose control. But if it's just scratches, it's not a big problem. First of all, the aluminum alloy hub is lighter than the iron hub, so the four hubs together will be much lighter than the iron hub.
If the car is driven at high speeds, it will basically be lighter and more fuel efficient. Secondly, generally speaking, aluminum alloy wheels are equipped with disc brakes. This kind of brake needs to dissipate heat to the ventilation disc, and the aluminum alloy material of the aluminum alloy wheel hub also has a large mesh, so the heat dissipation effect will be better.
Alloy wheels would look even better. First of all, iron hubs are cheap, and now iron hubs are pressed. And it is basically the same mold, the pattern on the hub has not changed, so it is cheaper.