How much is a Nissan aluminum alloy wheel

How much is Nissan Aluminum Alloy Wheels? One is a high-tech enterprise in my country that focuses on the R&D, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) ), strategic location and convenient transportation. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

Compared with steel wheels, aluminum alloy wheels have obvious advantages: low density, about 1/3 of steel wheels, which means that aluminum wheels with the same volume will be 2/3 lighter than steel wheels. Statistics show that if the vehicle quality is reduced by 10%, the fuel efficiency can be increased by 6% to 8%. Therefore, the promotion of aluminum alloy wheels is of great significance to energy saving, emission reduction and low-carbon life.

The thermal conductivity of aluminum is higher than that of steel, so under the same conditions, the heat dissipation performance of aluminum alloy wheels is better than that of steel wheels. Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "to satisfy all customers", strong research and development capabilities ; The company has a complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs".

The material development of ordinary automobile wheels is not ordinary pig iron, but steel with a carbon content of 2.0% or less; but the proportion of pig iron is as high as 2.0% to 4.5%, so in mechanical design, there is a big gap between the strength and toughness of the two different materials . However, even steel is not very strong. For example, body A-pillars made of hot-formed steel with a yield strength of up to 1,500 MPa may still bend in a crash.

Therefore, the compression ability of the steel wheel hub is relatively weak, that is to say, it is relatively simple and easy to deform. Nissan Aluminum Alloy Wheels Co., Ltd. was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production, and brand management. When a car wheel is turned against the edge of the road, it is easy to damage the outer edge of the wheel.

In this case, the main structure has not changed, so the safety performance of the hub is basically not affected, as long as it is repaired. Blasting to clean dirt, sanding, putty filling, fine sanding and painting. After these repair steps, the hub is basically brand new.

The wheel hub is made of aluminum alloy, and the metal has poor fatigue resistance. After it is deformed under the action of external force, it is forced to return to its original state by external force. Even if there are tiny cracks on the surface, the metal structure here is completely different from ordinary wheels from a scientific point of view.

If the hub of the car is bent, broken or severely corroded, it should be replaced in time. If damaged wheels are not replaced, the tires are likely to slip off the wheels and the car may even lose control. But if it's just scratches, it's not a big problem.

Do not change the wheel size at will. If you change it at will, it will definitely damage the original data of the vehicle. After blind modification, not only the fuel consumption of the vehicle will increase, but also the power and braking effect will be affected, so be careful to replace it.

Find a professional auto parts store to replace the car wheels. Generally, when car owners replace the wheels, most of the original wheels will be enlarged and widened to make full use of the advantages of wide tires and increase comfort and grip. Many car owners accidentally hit the side of the road or a corner when parking, scratching or causing the wheels to deform. Scratches are not a big problem, if the car hub is deformed or just falls off, it needs to be replaced.

Car owners should pay attention to daily driving to avoid scratching the hub due to luck. Pay attention to daily maintenance, check and clean the oil regularly, and there will be no major problems. Wash the car hub with clean water and wait for the hub to cool down before washing.

When the car is running, the wheel hub will rub against the tires and brake pads to generate heat. If you wash it with water immediately, the material of the hub will change, which can easily cause discoloration of the outer coating. Use soap and water to wipe off the oil. Usually, the wheel hub sizes calibrated by car wheel manufacturers are: 15 inches, 16 inches, 17 inches, 18 inches and 19 inches.

The small ones usually come with family cars, while the big ones come with more advanced ones. For example, for a family car that is generally less than 150,000 yuan, the official selections are 15, 16, and 17; Although the high-configured large wheels look very sporty and enhance the appearance of the vehicle, they are not perfect.

It has both advantages and disadvantages.