Equipment to be used for correcting aluminum alloy wheels

The aluminum alloy wheel hub adjustment device includes side wall correction, which is set on the spring bolt. The spring bolt head side is set for correction, and the other side is set for correction graduations. The correction table shows that it can rotate 360 ​​degrees. The wheel bolt installation holes of the turntable and the boss match. There are four evenly distributed spring bolts on the side wall of the calibration platform. There is a layer of gaskets inside the spring bolts. The gasket is ring-shaped and arranged on the outer wall of the hub. There are convex posts on the stabilization platform for correcting the audience's concave. Groove, boss fits with groove. Put the wheel hub into the calibration table, and adjust the roundness by adjusting the spring bolts. At the same time, you can adjust the parts that need to be corrected by turning the wheel hub. The amendments have improved productivity and product quality.

There are four evenly distributed spring bolts on the side wall of the calibration table, and there is a layer of washers on the inner side of the spring bolts. The washers are rings set on the outer wall of the wheel hub. I hope the above can help you. Tags: alloy wheels.