News
VR

About JWHEEL There are too many disadvantages of large wheels, but 18" is just right. user manual | JWHEEL

What size wheels are appropriate for a family car? Nowadays, many models can be fitted with larger wheels in order to pursue aesthetics and sports. 22-inch large wheels are optional, as the large wheels inevitably lead to a lower tyre flat ratio, the wheels protrude on the outside of the tyres, and the wheels will be scratched when they are pressed against the road teeth, and if you look at the wheels, you will know that the owner has not touched the road teeth.


May 08, 2023
About JWHEEL There are too many disadvantages of large wheels, but 18" is just right. user manual | JWHEEL


What size wheels are appropriate for a family car? Nowadays, many models can be fitted with larger wheels in order to pursue aesthetics and sports. 22-inch large wheels are optional, as the large wheels inevitably lead to a lower tyre flat ratio, the wheels protrude on the outside of the tyres, and the wheels will be scratched when they are pressed against the road teeth, and if you look at the wheels, you will know that the owner has not touched the road teeth.

 

The larger the wheel, the larger the wheel, the more sporty and aesthetically pleasing it is.2. The larger the wheel, the larger the brake disc, the larger the braking performance of the vehicle.3. The larger the wheel, the wider the tyre and the lower the flat ratio, the wider the tread, the better the grip of the tyre, the better and safer the car is when turning.4. The response is quicker and the tyres have less deformation and a clearer road feel.

 

Let's look at the advantages of large wheels, which is a must as a family car? The brake discs of family cars are generally small and do not require a lot of space for installation, and we do not need that strong grip and a clear sense of the road to drive a racing car.


     

1, expensive, 22 inch wheels cost about $1000, wheels are expensive, tyres are also expensive, after the replacement of tyres is also a lot of support.





2, more likely to blow up, if encounter the road has a large puddle or raised obstacles, because the tyre flat rate is low, the wall is short, after the impact of the tyre, the buffer margin is small, the tyre is easy to bulge, bulging tyres will be scrapped.


3, poor comfort, large wheel tyres have a low flat ratio, low tyres, less cushioning area, there are small bumps will be transmitted to the body, resulting in poor ride comfort.


                    



4, the wheel is more likely to be scratched, the tire wall of the large wheel is very short, shorter than the general road teeth, and the wheel is protruding out of the tyre, more likely to rub the hub, while the small wheel, flat rate is large, the tire wall is higher, more protective of the wheel is not rubbed.



   


5, the tyre is heavier, not tight affect acceleration performance, fuel consumption will also be a little higher.







  So, is it necessary for us to buy a car with larger size wheels? If the advantages of large wheels are what you need, and the disadvantages of large wheels, you can also accept, then add larger wheels, anyway, I think the 17-19 inch wheels for family cars are big enough, beautiful enough, the tyre wall is thicker, damping comfort is good, the height of the tyre wall and the height of the road teeth is about the same, rubbing the road teeth will not scratch the wheels, the price is moderate.



  Jwheel, as an professional wheel manufacturer, concentrates in R&D and manufacturing of aluminum alloy wheels, including casting wheels, forging wheels and flow-form wheels. The products of it have passed the certifications of SEI、SEMA,VIA, JWL, JWL-T, TUV and so on. Since establishment, Jwheel has been developing steadily, with rich experience of designing and producing aluminum alloy wheels. It has earned the appreciation of both domestic market and foreign market with its high technology, good quality and customer service. It provided OEM service to many international brands like Vossen, OE Wheel, TSW, Rays, ProLine, Oxygen, AUTEC, etc., and it also provide ODM service, that is, for producing a new wheel, you can just provide a sketch, drawing or picture, and then Jwheel will finish the rest parts. By the way, the MOQ of forging wheels is four. (For more information, just go to the website: https://www.jjjwheel.com)

 


   J247-15    15x4.5    43    100*4H    66/73.1    MUGM21/MUC    

                   15X5.5    42/50    100*4H    60/67    MUGM21DP/MUGM21EP    




                               





The color is full and bright, with a strong sense of layering. It will form a high-strength, high-durability film layer when applied on the base surface of the building, making the wall surface resistant to washing and lasting clean and bright.

FAQ

1.Q: Where’s your factory ?
A: My company is in Jiangmen City, just need 1 hour from GuangZhou BaiyunStation to our factory.
2.Q: What kinds of method do you use to put customized logo?
A: Silk screen printing. Laser engraving. Stamping.
3.Q: Do you have new design every year?
A: Yes, we have over 100 new design models every year.

Advantages

1.The company has been focusing on quality, management and environmental protection, and has passed. ISO 9001:2015, IATF 16949, Germany KBA, Japan VIA association certification (laboratory certification).
2.The company has obtained a number of patents by virtue of its strong technical strength: Patent for a clean grinding table based on aluminum alloy wheels.
3.The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating and We have formed a complete testing system from the incoming inspection of raw materials to the factory inspection of finished products, and our testing capabilities range from material and performance to dimensional and impact and fatigue testing, and then to the testing of the coating performance of finished wheels.
4.We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of "low-pressure casting + spinning". We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers' needs and lead the industry development.

About JWHEEL

Guangdong Guangchuan Auto Parts Trading  has its first plant established in 1993. After over 29 years’ development, Guangdong Guangchuan Auto Parts Trading has become a world-leading supplier for many international famous wheel brands. Guangdong Guangchuan Auto Parts Trading has an annual production capacity of 1.5 million and it provides one-stop solution for design and manufacturing. It’s equipped with advanced production facilities such as aluminum alloy melting furnace, casting production line, spinning and forging equipment, automatic painting line, helium leak detection system and automatic dynamic balance inspection system.


Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --
Chat with Us

Send your inquiry

Choose a different language
English
ภาษาไทย
Nederlands
हिन्दी
한국어
日本語
العربية
Português
italiano
русский
français
Deutsch
Español
简体中文
Türkçe
Current language:English