Which brand of Volvo original wheels is better

Which brand of Volvo original wheels is good is a high-tech enterprise in my country focusing on R&D, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) ), strategic location and convenient transportation. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

In order to ensure the safety and reliability of the vehicle to a large extent, no matter how old the vehicle is, it is necessary to check the wheel hub of the car frequently, and pay attention to whether there are early warning signs of wear, including friction noise when turning or suspension combination wheel turning. Abnormal deceleration. If you hear car wheel bearing noise, first, it is important to find out where the noise is coming from. Many moving parts may create noise, or some rotating parts may be in contact with non-rotating parts.

If it is confirmed that the bearing is noisy, the bearing may be damaged and needs to be replaced. Since the failure conditions of the bearings on both sides caused by the front hub are similar, even if only one bearing is damaged, it is recommended to replace it in pairs. Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "to satisfy all customers", strong research and development capabilities ; The company has a complete and scientific quality management system.

The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". Before driving, everyone should take a minute to look where the car can see to see if there are any abnormalities, or do regular inspections. If your car is often driven at high speed, it is even more important to increase the degree of inspection.

Drive on smooth roads. You can't drive fast on uneven roads, drive slowly. You should drive slowly when encountering roadblocks. This is usually the main cause of damage to car hubs. Damage to car hubs is generally invisible to the naked eye, and then slowly becomes a safety hazard.

Which brand good Volvo original wheel hub company was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production and brand management. Wheels are divided into aluminum alloy wheels and steel wheels, and aluminum alloy wheels are divided into forging and casting. The fatigue strength and bending strength of forged aluminum alloy wheels are much higher than those of steel wheels. Under the same environment, the heat dissipation coefficient of aluminum alloy wheels is three times that of steel wheels, and the maximum bearing capacity of forged aluminum alloy wheels is five times that of steel wheels.

Aluminum alloy wheels have the characteristics of light weight, tire saving, beautiful appearance and so on. At the same time, the safety of forged aluminum alloy wheels is much higher than that of steel rings. According to JIT standards, when the vehicle hits the threshold at 50 km/h, only the forged aluminum alloy wheels can keep running.

The aluminum alloy material has high heat exchange efficiency, that is, the heat absorption and heat dissipation speed is fast, and it can quickly absorb the heat conducted by the brake disc, and then quickly dissipate it into the air. The high hardness of the aluminum alloy wheel significantly reduces the inclination of the tire or the wheel when cornering. Aluminum alloy wheels can reduce the unladen weight of the tire and improve the grip of the tire.

Since road vibration and steering forces are very sensitive to unladen weight, the alloy wheels also exhibit better flex and more responsive steering action. Compared with steel wheels, the advantages of aluminum alloy wheels are still very obvious, such as lighter weight, higher strength, and more profound requirements on automobile performance. When the vehicle is moving forward, it presses down on a hard, sharp object that is higher than the distance between the outer edge of the car's wheel hub and the ground, and is located on the outer edge of the tire.

When the tire was pressed against the object, the sharp corner of the object just hit the outer edge of the tire, piercing the fragile outer edge of the tire (this would explain the radial fracture of the tire). After a tire blows out, it immediately loses its cushioning ability. A hard object hit the hub directly, causing the hub to break near the edge of the valve (this would explain the defect in the edge of the hub).

It then causes the entire hub to break. Or when the hub encounters a large pit, it will pass quickly, exceeding the bearing range of the hub, resulting in fracture. Which brand of Volvo original wheels is good Many car owners accidentally hit the side of the road or a corner when parking, scratching or causing the wheels to deform.

Scratches are not a big problem, if the car hub is deformed or just falls off, it needs to be replaced. Car owners should pay attention to daily driving to avoid scratching the hub due to luck. Pay attention to daily maintenance, check and clean the oil regularly, and there will be no major problems.

Wash the car hub with clean water and wait for the hub to cool down before washing. When the car is running, the wheel hub will rub against the tires and brake pads to generate heat. If you wash it with water immediately, the material of the hub will change, which can easily cause discoloration of the outer coating. Use soap and water to wipe off the oil.