Which brand of Volvo forged wheels is good is a Chinese high-tech enterprise focusing on the R&D, design, production and sales of aluminum alloy wheels, and a Chinese auto parts export base enterprise. It is located in Anhui Guangde Economic Development Zone (the junction of Jiangsu, Zhejiang and Anhui) ), strategic location and convenient transportation. The company covers an area of 120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.
In order to ensure the safety and reliability of the vehicle to a large extent, no matter how old the vehicle is, it is necessary to check the wheel hub of the car frequently, and pay attention to whether there are early warning signs of wear, including friction noise when turning or suspension combination wheel turning. Abnormal deceleration. If you hear car wheel bearing noise, first, it is important to find out where the noise is coming from. Many moving parts may create noise, or some rotating parts may be in contact with non-rotating parts.
If it is confirmed that the bearing is noisy, the bearing may be damaged and needs to be replaced. Since the failure conditions of the bearings on both sides caused by the front hub are similar, even if only one bearing is damaged, it is recommended to replace it in pairs. Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "satisfy all customers", strong research and development capabilities ; The company has a complete and scientific quality management system.
The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". If the aluminum alloy wheel is broken, in order to save costs, you still go to some unprofessional places for repairs, then you are very wrong, so the repaired wheels are not guaranteed. In fact, many places are reworked by the original factory process, and the airtight test, grinding, painting and other processes can be reworked.
If you're concerned about safety, the hubs are also cast from an aluminum alloy solution during the casting process. Similarly, the welding is carried out by means of internal and external welding, and the same aluminum alloy material is used, so there is no need to worry about quality problems. Which brand good Volvo forged wheels company was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production and brand management.
The density of steel is significantly higher than that of aluminum alloy building materials, which is why aluminum alloys have been used for the lightweight of automobile chassis in my country; automobile wheels are "unsprung parts". If the unsprung mass cost is too large, it will inevitably affect the work performance, handling performance and actual fuel consumption. Just like a car hub, the weight loss of the hub is a direct result of the controlled torque output of the engine; because the powertrain transmitted to the wheel via the half shaft needs to be able to overcome the priority thing is the mass of the wheel (weight/drag during operation) , so the power at the hub of the car needs to be synchronized and can be lowered.
For all types of off-road vehicles and heavy trucks, the original intention of using steel car wheels is to ensure driving safety in harsh environments, because the deformation limit of these car wheels is very low, but the fracture limit caused by deformation is relatively high. That is to say, the deformation of the steel automobile wheel hub is very serious. As long as it does not break after deformation, it can be driven barely, while the off-road vehicle is mainly driven on unpaved roads. With the ups and downs of the road surface and the interaction of various foreign objects, the wheel hub of the car is easily deformed.
The material development of ordinary automobile wheels is not ordinary pig iron, but steel with a carbon content of 2.0% or less; but the proportion of pig iron is as high as 2.0% to 4.5%, so in mechanical design, there is a big gap between the strength and toughness of the two different materials . However, even steel is not very strong. For example, body A-pillars made of hot-formed steel with a yield strength of up to 1,500 MPa may still bend in a crash.
Therefore, the compression ability of the steel wheel hub is relatively weak, that is to say, it is relatively simple and easy to deform. Which brand of Volvo forged wheels is good? Aluminum alloy wheels are more suitable for passenger cars than steel wheels. At present, their manufacturing processes can be divided into three categories. The first is casting, which is the process of choice for most car manufacturers today.
Low-pressure casting is a process in which molten aluminum is filled into a mold under pressure and solidifies and crystallizes under pressure. In the same situation, compared with gravity casting, the internal structure of low-pressure casting hub is denser and stronger. At present, low-pressure casting has become a process for producing aluminum alloy wheels, and most domestic aluminum alloy wheel manufacturers use low-pressure casting.