Where to buy Volvo aluminum alloy wheels

Where is Volvo Aluminum Alloy Wheels for sale is a high-tech enterprise in my country focusing on R&D, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) Office), the geographical position is superior and the transportation is convenient. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

The density of steel is significantly higher than that of aluminum alloy building materials, which is why aluminum alloys have been used for the lightweight of automobile chassis in my country; automobile wheels are "unsprung parts". If the unsprung mass cost is too large, it will inevitably affect the work performance, handling performance and actual fuel consumption. Just like a car hub, the weight loss of the hub is a direct result of the controlled torque output of the engine; because the powertrain transmitted to the wheel via the half shaft needs to be able to overcome the priority thing is the mass of the wheel (weight/drag during operation) , so the power at the hub of the car needs to be synchronized and can be lowered.

Based on the principles of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "satisfy all customers", strong research and development Ability; the company has a complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". Automobile wheels are mainly divided into steel wheels and light alloy wheels according to their materials. Light alloy wheels are mainly made of aluminum alloy and magnesium alloy.

In today's automobile market, steel wheels are rare, and most models use aluminum alloy wheels, that is, light alloy wheels. The aluminum alloy materials used to make aluminum wheels include A356, 6061, etc., among which A356 is widely used as cast aluminum wheels. A356 aluminum alloy has the characteristics of small specific gravity and good corrosion resistance.

It is mainly composed of aluminum, silicon, magnesium, iron, manganese, zinc, copper, titanium and other metal elements, and aluminum accounts for about 92%, which is a mature aluminum alloy material. Volvo Aluminum Alloy Wheels Co., Ltd. was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production, and brand management. Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking.

In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving. Check for scars. If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt.

When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar. Use the brush tip to apply topcoat to the damaged parts of the car hub. After drying, it shrinks slightly.

Generally, the wheel hub sizes calibrated by car wheel manufacturers are: 15 inches, 16 inches, 17 inches, 18 inches and 19 inches. The small ones usually come with family cars, while the big ones come with more advanced ones. For example, for a family car that is generally less than 150,000 yuan, the official selections are 15, 16, and 17;

Although the high-configured large wheels look very sporty and enhance the appearance of the vehicle, they are not perfect. It has both advantages and disadvantages. If the hub of the car is bent, broken or severely corroded, it should be replaced in time.

If damaged wheels are not replaced, the tires are likely to slip off the wheels and the car may even lose control. But if it's just scratches, it's not a big deal. Do not change the wheel size at will.

If you change it at will, it will definitely damage the original data of the vehicle. After blindly refitting, not only the fuel consumption of the vehicle will increase, but also the power and braking effect will be affected, so be careful to replace it. Find a professional auto parts store to replace the car wheels. Generally, when car owners replace the wheels, most of the original wheels will be enlarged and widened to make full use of the advantages of wide tires and increase comfort and grip.

Where to buy Volvo aluminum alloy wheels for sale In order to ensure the safety and reliability of the vehicle to a large extent, no matter how old the vehicle is, it is necessary to check the wheels of the car frequently, and pay attention to whether there are early warning signs of wear, including friction when turning. Noise or unusual deceleration when the wheels of the suspension combination turn. If you hear car wheel bearing noise, first, it is important to find out where the noise is coming from. Many moving parts may create noise, or some rotating parts may be in contact with non-rotating parts.

If it is confirmed that the bearing is noisy, the bearing may be damaged and needs to be replaced. Since the failure conditions of the bearings on both sides caused by the front hub are similar, even if only one bearing is damaged, it is recommended to replace it in pairs.