Where to buy BMW aluminum alloy wheels, in order to ensure the safety and reliability of the vehicle to a large extent, no matter how old the vehicle is, it is necessary to check the wheels of the car frequently, and pay attention to whether there are early warning signs of wear, including friction during rotation. Noise or unusual deceleration when the wheels of the suspension combination turn. If you hear car wheel bearing noise, first, it is important to find out where the noise is coming from. Many moving parts may create noise, or some rotating parts may be in contact with non-rotating parts.
If it is confirmed that the bearing is noisy, the bearing may be damaged and needs to be replaced. Since the failure conditions of the bearings on both sides caused by the front hub are similar, even if only one bearing is damaged, it is recommended to replace it in pairs. The company takes "survival by quality, market by reputation, development by science and technology, and efficiency by management" as its business purpose. In order to ensure that every wheel hub can do better, the company has built a strict quality monitoring and testing system. , Products have passed TS16949 quality system certification.
The products include cast wheels and forged wheels. The annual output of casting wheels reaches about 1.1 million pieces, and the annual output of forged wheels reaches about 18,000 pieces. The products not only cover nearly 30 provinces, municipalities and autonomous regions in China, but also are exported to the United States, Russia, Southeast Asia, and the Middle East. , Japan, Singapore, Iraq and other dozens of regions. In order to meet the market demand, the company is still constantly reforming and innovating, improving management level, improving product quality, giving full play to the company's technical advantages, brand advantages, talent advantages and customer advantages in the industry, and striving to build the company into a competitive and competitive company in the industry. An enterprise with influence and development potential. On average, each aluminum alloy wheel is 2 kg lighter than a steel wheel of the same size, and a five-wheeled vehicle can save 10 kg.
Although aluminum alloy wheels are more expensive than ordinary steel wheels, the fuel cost savings will be enough to offset the cost of driving 20,000 kilometers per car. The impact resistance, tensile strength and thermal strength of aluminum alloy wheels are higher than those of steel wheels. This is also one of the reasons why aluminum alloy occupies an important position in my country's imitation industry and aviation industry.
The precision can be as high as 0.05mm, and the balance performance is good, which is beneficial to eliminate - in addition, the general body length and steering wheel vibration. Over the years, all employees of the company have been determined to forge ahead, and the technology and equipment have been continuously improved, forming a full-coverage aluminum alloy wheel forging business. In order to adapt to the development of the market, a group of technical and management talents have been trained, and a good market reputation has been formed. It will develop in the direction of "higher and farther" and better serve the majority of car owners and the society.
Where are BMW aluminum alloy wheels for sale? Many car owners accidentally hit the side of the road or a corner when parking, scratching or causing the wheels to deform. Scratches are not a big problem, if the car hub is deformed or just falls off, it needs to be replaced. Car owners should pay attention to daily driving to avoid scratching the hub due to luck.
Pay attention to daily maintenance, check and clean the oil regularly, and there will be no major problems. Wash the car hub with clean water and wait for the hub to cool down before washing. When the car is running, the wheel hub will rub against the tires and brake pads to generate heat.
If you wash it with water immediately, the material of the hub will change, which can easily cause discoloration of the outer coating. Use soap and water to wipe off the oil. The company has a management team with excellent technology and rich management experience, adheres to the corporate philosophy of "customer first", builds core competitiveness, gives full play to comprehensive advantages, strives for progress in stability, and creates an excellent brand in the alloy wheel industry, so that strong quality and fashion peers. Aluminum alloy wheels are more suitable for passenger cars than steel wheels. At present, their manufacturing processes can be divided into three categories.
The first is casting, which is the process of choice for most car manufacturers today. Low-pressure casting is a process in which molten aluminum is filled into a mold under pressure and solidifies and crystallizes under pressure. In the same situation, compared with gravity casting, the internal structure of low-pressure casting hub is denser and stronger.
At present, low-pressure casting has become a process for producing aluminum alloy wheels, and most domestic aluminum alloy wheel manufacturers use low-pressure casting. Car wheels play an important role in improving the appearance, but when choosing wheels, every detail must be meticulous. The parameters of the hub will affect the use of the hub and the vehicle.
If the PCD value is incorrect, it may not install properly. The ET value will not only affect installation and use, but also affect future upgrades and modifications. When reinstalling the car hub, attention should be paid to the size of the hole.
If this size is smaller than the original size, it cannot be installed naturally. However, if it is larger than the original size and no comparison measures are taken, the concentricity of the vehicle will be different when driving, resulting in abnormal noise and vibration of the vehicle, which will directly affect the vehicle in severe cases. Where are BMW aluminum alloy wheels for sale? Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking.
In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving. Check for scars. If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt.
When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar. Use the brush tip to apply topcoat to the damaged parts of the car hub. After drying, it shrinks slightly.