Where can Toyota forged wheels be sold?

2023/03/25

Generally, the wheel hub sizes calibrated by car wheel manufacturers are: 15 inches, 16 inches, 17 inches, 18 inches and 19 inches. The small ones usually come with family cars, while the big ones come with more advanced ones. For example, for a family car that is generally less than 150,000 yuan, the official selections are 15, 16, and 17;

Although the high-configured large wheels look very sporty and enhance the appearance of the vehicle, they are not perfect. It has both advantages and disadvantages. The company takes "survival by quality, market by reputation, development by science and technology, and efficiency by management" as its business purpose. In order to ensure that every wheel hub can do better, the company has built a strict quality monitoring and testing system. , Products have passed TS16949 quality system certification.

The products include cast wheels and forged wheels. The annual output of casting wheels reaches about 1.1 million pieces, and the annual output of forged wheels reaches about 18,000 pieces. The products not only cover nearly 30 provinces, municipalities and autonomous regions in China, but also are exported to the United States, Russia, Southeast Asia, and the Middle East. , Japan, Singapore, Iraq and other dozens of regions. In order to meet the market demand, the company is still constantly reforming and innovating, improving management level, improving product quality, giving full play to the company's technical advantages, brand advantages, talent advantages and customer advantages in the industry, and striving to build the company into a competitive and competitive company in the industry. An enterprise with influence and development potential. Under the premise of the same weight, the aluminum alloy wheels are more impact-resistant, while the steel wheels are more flexible.

The impact force that can deform a steel wheel may not deform an aluminum alloy wheel, because aluminum alloy wheels are thicker. However, when the impact force is large enough to a certain extent, the aluminum alloy wheel may break directly, while the steel wheel will only deform more seriously. Under the premise of ensuring the strength, the lighter the hub, the better, the more sensitive the suspension response, the less effort the hub rotates, the better the acceleration, and the better the theoretical fuel consumption. Aluminum alloy wheels are generally considered to be lighter.

Over the years, all employees of the company have been determined to forge ahead, and the technology and equipment have been continuously improved, forming a full-coverage aluminum alloy wheel forging business. In order to adapt to the development of the market, a group of technical and management talents have been trained, and a good market reputation has been formed. It will develop in the direction of "higher and farther" and better serve the majority of car owners and the society. Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking.

In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving. Check for scars. If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt.

When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar. Use the brush tip to apply topcoat to the damaged parts of the car hub. After drying, it shrinks slightly.

The company has a management team with excellent technology and rich management experience, adheres to the corporate philosophy of "customer first", builds core competitiveness, gives full play to comprehensive advantages, strives for progress in stability, and creates an excellent brand in the alloy wheel industry, so that strong quality and fashion peers. When the vehicle is moving forward, it presses down on a hard, sharp object that is higher than the distance between the outer edge of the car's wheel hub and the ground, and is located on the outer edge of the tire. When the tire was pressed against the object, the sharp corner of the object just hit the outer edge of the tire, piercing the fragile outer edge of the tire (this would explain the radial fracture of the tire).

After a tire blows out, it immediately loses its cushioning ability. A hard object hit the hub directly, causing the hub to break near the edge of the valve (this would explain the defect in the edge of the hub). It then causes the entire hub to break.

Or when the hub encounters a large pit, it will pass quickly, exceeding the bearing range of the hub, resulting in fracture. The material development of ordinary automobile wheels is not ordinary pig iron, but steel with a carbon content of 2.0% or less; but the proportion of pig iron is as high as 2.0% to 4.5%, so in mechanical design, there is a big gap between the strength and toughness of the two different materials . However, even steel is not very strong.

For example, body A-pillars made of hot-formed steel with a yield strength of up to 1,500 MPa may still bend in a crash. Therefore, the compression ability of the steel wheel hub is relatively weak, that is to say, it is relatively simple and easy to deform. Where to buy Toyota Forged Wheels If the car wheel is bent, broken or severely corroded, it should be replaced in time.

If damaged wheels are not replaced, the tires are likely to slip off the wheels and the car may even lose control. But if it's just scratches, it's not a big deal. Do not change the wheel size at will.

If you change it at will, it will definitely damage the original data of the vehicle. After blindly refitting, not only the fuel consumption of the vehicle will increase, but also the power and braking effect will be affected, so be careful to replace it. Find a professional auto parts store to replace the car wheels. Generally, when car owners replace the wheels, most of the original wheels will be enlarged and widened to make full use of the advantages of wide tires and increase comfort and grip.

CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry
Chat with Us

Send your inquiry

Choose a different language
English
ภาษาไทย
Nederlands
हिन्दी
한국어
日本語
العربية
Português
italiano
русский
français
Deutsch
Español
Current language:English