Where can I buy Honda aluminum alloy wheels?

Where is Honda Aluminum Alloy Wheel for sale is a high-tech enterprise in my country focusing on R&D, design, production and sales of aluminum alloy wheels, and an export base enterprise of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) Office), the geographical position is superior and the transportation is convenient. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

When the vehicle is moving forward, it presses down on a hard, sharp object that is higher than the distance between the outer edge of the car's wheel hub and the ground, and is located on the outer edge of the tire. When the tire was pressed against the object, the sharp corner of the object just hit the outer edge of the tire, piercing the fragile outer edge of the tire (this would explain the radial fracture of the tire). After a tire blows out, it immediately loses its cushioning ability.

A hard object hit the hub directly, causing the hub to break near the edge of the valve (this would explain the defect in the edge of the hub). It then causes the entire hub to break. Or when the hub encounters a large pit, it will pass quickly, exceeding the bearing range of the hub, resulting in fracture.

Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "to satisfy all customers", strong research and development Ability; the company has a complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". Ordinary aluminum alloy wheels are light in weight and fast in speed.

The moment of inertia of aluminum alloy wheels is much smaller than that of steel wheels. Therefore, the installation of aluminum alloy wheels can make the car more sensitive in terms of acceleration, turning and braking, and the lightweight wheels can make the car speed up faster. In addition to excellent performance on flat roads, lightweight wheels can also improve comfort on bumpy roads.

The cooling effect is better. Aluminum alloy has high strength, narrow spokes, and easy styling, which can leave a larger ventilation space, accommodate larger brake calipers and brake discs, and reduce temperature more effectively. Honda Aluminum Alloy Wheels Co., Ltd. was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production, and brand management.

Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking. In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving. Check for scars.

If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt. When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar. Use the brush tip to apply topcoat to the damaged parts of the car hub.

After drying, it shrinks slightly. Now there are more and more patterns on the wheel hub of the car, and the appearance value is getting higher and higher. Choosing the right wheel hub is like wearing clothes, reflecting the owner's taste.

But we can't just focus on appearance value. The data gap between the modified wheel hub and the original wheel hub should not be too large. Many car owners pursue the lighter the wheel hub, the better, which can reduce the overall quality of the car and increase the speed of the car.

The advantages of forged wheels are: light weight, high density, and high strength, but the disadvantages are also obvious, that is, high prices. In fact, the wheels of current cars are all cast. Casting is to melt aluminum or other raw materials into the mold at high temperature, and the cost is low, which is the mainstream of the wheel hub in the market at present.

If you accidentally install inferior car wheels, it will not only bring hidden dangers to your own travel, but also endanger the lives of others. In recent years, traffic accidents caused by poor quality of wheel hubs have occurred from time to time. It is difficult to distinguish by sight alone, and requires professional instruments to measure, but it can be distinguished by listening to the sound.

Only from the appearance, it is difficult to see whether the car wheel is real or not. Some quality parameters of automobile wheels can only be measured with professional instruments, and the appearance of the wheels does not have obvious anti-counterfeiting marks like RMB. Moreover, due to the application of related metal protection materials, it is more difficult to distinguish, so many car owners have suffered losses.

Where is the Honda aluminum alloy wheel for sale? When the temperature of the wheel hub is high, it should be allowed to cool naturally before cleaning, and do not wash it with cold water. Otherwise, the aluminum alloy wheel hub will be damaged, and even the brake disc will be deformed, which will affect the braking effect. In addition, cleaning the aluminum alloy wheel with a high-temperature cleaning agent will cause a chemical reaction on the surface of the wheel, which will lose its luster and affect the appearance.

When the asphalt on the wheel hub is difficult to remove, if the general cleaning agent does not help, try to use a brush to remove it, but do not use a hard brush, especially an iron brush, so as not to damage the surface of the wheel hub.