When the vehicle is moving forward, it will press down a hard and sharp object, which is higher than the distance between the outer edge of the car wheel hub and the ground, and is located on the outer edge of the tire. When the tire was pressed against the object, the sharp corner of the object just hit the outer edge of the tire, piercing the fragile outer edge of the tire (this would explain the radial fracture of the tire). After a tire blows out, it immediately loses its cushioning ability.
A hard object hit the hub directly, causing the hub to break near the edge of the valve (this would explain the defect in the edge of the hub). It then causes the entire hub to break. Or when the hub encounters a large pit, it will pass quickly, exceeding the bearing range of the hub, resulting in fracture.
Adhering to the principle of "technical innovation, quality first, customer first", we are actively exploring new markets. The company now integrates production, scientific research and sales. With the continuous expansion of domestic and foreign markets, the company will expand its production capacity in a timely manner to meet the diverse needs of customers. We can provide services according to customer requirements for product style, structure and function. Adhere to the spirit of pioneering and enterprising, hard work and enterprising, introduce high-tech talents at home and abroad, accumulate years of industry experience, have fully automated, high-tech, high-energy-saving technologies, and introduce international management mechanisms, a management team composed of experts, and research and development, production, management team.
For all types of off-road vehicles and heavy trucks, the original intention of using steel car wheels is to ensure driving safety in harsh environments, because the deformation limit of these car wheels is very low, but the fracture limit caused by deformation is relatively high. That is to say, the deformation of the steel automobile wheel hub is very serious. As long as it does not break after deformation, it can be driven barely, while the off-road vehicle is mainly driven on unpaved roads. With the ups and downs of the road surface and the interaction of various foreign objects, the wheel hub of the car is easily deformed.
What kind of Volvo wheels look good? The adhesion of aluminum alloy wheels during the electroplating process is mainly manifested as blistering and peeling. Bubbles refer to the phenomenon of bulges in local areas between coatings. Small bubbles are difficult to pierce with a knife. Large bubbles are similar to exfoliation after clearing and also exhibit the characteristics of exfoliation. Spalling refers to the phenomenon that the positive film area between the coatings can separate and tear off. Spalling can occur between zinc plating and nickel plating, between semi-gloss nickel and acid copper, and between plated hubs and nickel plating. Different Types have different applications and different solutions.
The company takes "innovation, energy saving, firmness and safety" as its quality premise. Adhere to the development concept of "beyond lightweight and serve the world". To make the impossible possible, to create extraordinary qualities.
Get higher returns with less investment. What kind of Volvo wheels look good? Many car owners accidentally hit the side of the road or a corner when parking, scratching or causing the wheels to deform. Scratches are not a big problem, if the car hub is deformed or just falls off, it needs to be replaced.
Car owners should pay attention to daily driving to avoid scratching the hub due to luck. Pay attention to daily maintenance, check and clean the oil regularly, and there will be no major problems. Wash the car hub with clean water and wait for the hub to cool down before washing.
When the car is running, the wheel hub will rub against the tires and brake pads to generate heat. If you wash it with water immediately, the material of the hub will change, which can easily cause discoloration of the outer coating. Use soap and water to wipe off the oil. The company always adheres to independent research and development, technological innovation, adheres to the business philosophy of product quality and high quality, and has perfect quality conditions and testing capabilities.
The strict control and continuous improvement of the product processing process provide customers with a good guarantee of high-quality and reliable products. Based on the enterprise spirit of "integrity, pragmatism, innovation and win-win", the company is willing to provide customers with high-quality products and services. The company has a high-quality workforce and a strong management team, and has the ability to build an advanced enterprise with research and development capabilities.
When the temperature of the hub is high, let it cool naturally before cleaning, and do not wash it with cold water. Otherwise, the aluminum alloy wheel hub will be damaged, and even the brake disc will be deformed, which will affect the braking effect. In addition, cleaning the aluminum alloy wheel with a high-temperature cleaning agent will cause a chemical reaction on the surface of the wheel, which will lose its luster and affect the appearance.
When the asphalt on the wheel hub is difficult to remove, if the general cleaning agent does not help, try to use a brush to remove it, but do not use a hard brush, especially an iron brush, so as not to damage the surface of the wheel hub. What kind of Volvo wheels look good? The maintenance of car wheels is like the maintenance of cars. Many household cleaners and detergents commonly used in the market have too much impact on the surface of the wheel due to alkalinity or acidity, and will produce chemical reactions on the surface of the wheel. It will tarnish and affect the appearance. Therefore, it should be used with care.
You can choose some neutral soapy water to wash. In order not to damage the protective layer of the hub surface, paint polish or other abrasive materials must not be used on the hub. When the alloy protective paint is damaged, such as scratches by hard objects during driving, repair and repaint the alloy wheels at a professional maintenance station as soon as possible.