What style of Mercedes-Benz spinning wheels look good?

What style of Mercedes-Benz spinning wheel hub is good-looking is a high-tech enterprise in my country that focuses on the research and development, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) Office), the geographical position is superior and the transportation is convenient. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

Before driving, everyone should take a minute to look where the car can see to see if there are any abnormalities, or do regular inspections. If your car is often driven at high speed, it is even more important to increase the degree of inspection. Drive on smooth roads.

You can't drive fast on uneven roads, drive slowly. You should drive slowly when encountering roadblocks. This is usually the main cause of damage to car hubs. Damage to car hubs is generally invisible to the naked eye, and then slowly becomes a safety hazard. Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "to satisfy all customers", strong research and development Ability; the company has a complete and scientific quality management system.

The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". When the temperature of the car hub is high, it should be allowed to cool naturally before cleaning. Do not wash it with cold water, otherwise it will damage the aluminum alloy wheel hub, and even deform the brake disc, which will affect the braking effect.

In addition, cleaning the aluminum alloy wheel with a high-temperature cleaning agent will cause a chemical reaction on the surface of the car wheel, which will lose its luster and affect the appearance. If the hub of the car is bent, broken or severely corroded, it should be replaced in time. If damaged car wheels are not replaced, the tires are likely to slip off the car wheels, and the car may even lose control.

But if it's just scratches, it's not a big deal. Founded in 2011, after more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production and brand management. In order to ensure the safety and reliability of the vehicle to a large extent, no matter how old the vehicle is, it is necessary to check the wheel hub of the car frequently, and pay attention to whether there are early warning signs of wear, including friction noise when turning or suspension combination wheel turning. Abnormal deceleration.

If you hear car wheel bearing noise, first, it is important to find out where the noise is coming from. Many moving parts may create noise, or some rotating parts may be in contact with non-rotating parts. If it is confirmed that the bearing is noisy, the bearing may be damaged and needs to be replaced.

Since the failure conditions of the bearings on both sides caused by the front hub are similar, even if only one bearing is damaged, it is recommended to replace it in pairs. First of all, the aluminum alloy hub is lighter than the iron hub, so the four hubs together will be much lighter than the iron hub. If the car is driven at high speeds, it will basically be lighter and more fuel efficient.

Secondly, generally speaking, aluminum alloy wheels are equipped with disc brakes. This kind of brake needs to dissipate heat to the ventilation disc, and the aluminum alloy material of the aluminum alloy wheel hub also has a large mesh, so the heat dissipation effect will be better. Alloy wheels would look even better.

First of all, iron hubs are cheap, and now iron hubs are pressed. And it is basically the same mold, the pattern on the hub has not changed, so it is cheaper. The compressive strength of aluminum alloy wheels is quite high, and the compressive capacity of ordinary household wheels is more than 20 tons.

The use of such wheels in actual trucks can meet the requirements, but the brittleness of aluminum alloy materials is poor, that is, when the compression limit is 20 tons, the elastic deformation space before fracture is very small, as long as the standard basic fracture moment is exceeded. Therefore, off-road vehicles often do not use aluminum alloy wheels. Occasionally flying will easily cause the wheel to break, but again, the possibility of such a situation is very small for off-road domestic vehicles. The wheels of this material can meet various paved and normal non-paved roads. road commuting. What kind of good-looking Mercedes-Benz spinning wheels? Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking.

In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving. Check for scars. If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt.

When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar. Use the brush tip to apply topcoat to the damaged parts of the car hub. After drying, it shrinks slightly.