What style of BMW forged wheels look good?

What style of BMW forged wheels looks good? No slight deformation can be seen with the naked eye, and no deformation can be seen inside the car wheel. At this time, when driving fast, the steering wheel shakes, indicating that the wheel hub of the car may be deformed, and it is time to balance it. Hub flanges are divided into inner flanges and outer flanges.

The outer flange is visible, but the inner bridge is not. However, when getting out of the car at high speed, you can pay attention to whether there is vibration in the steering wheel or whether the tire is leaking. If there is one of these two cases, it must be deformed.

If the hub of a car is cracked in a big pit, it will definitely be deformed. At this time, it is necessary to repair the deformation when repairing the crack. The company takes "survival by quality, market by reputation, development by science and technology, and efficiency by management" as its business purpose. In order to ensure that every wheel hub can do better, the company has built a strict quality monitoring and testing system. , Products have passed TS16949 quality system certification.

The products include cast wheels and forged wheels. The annual output of casting wheels reaches about 1.1 million pieces, and the annual output of forged wheels reaches about 18,000 pieces. The products not only cover nearly 30 provinces, municipalities and autonomous regions in China, but also are exported to the United States, Russia, Southeast Asia, and the Middle East. , Japan, Singapore, Iraq and other dozens of regions. In order to meet the market demand, the company is still constantly reforming and innovating, improving management level, improving product quality, giving full play to the company's technical advantages, brand advantages, talent advantages and customer advantages in the industry, and striving to build the company into a competitive and competitive company in the industry. An enterprise with influence and development potential. What style of BMW forged wheels look good? The maintenance of car wheels is like the maintenance of cars. Many household cleaners and detergents commonly used in the market have too much impact on the surface of the wheel due to alkalinity or acidity, and will produce chemical reactions on the surface of the wheel. , making it dull and affecting the appearance.

Therefore, it should be used with care. You can choose some neutral soapy water to wash. In order not to damage the protective layer of the hub surface, paint polish or other abrasive materials must not be used on the hub.

When the alloy protective paint is damaged, such as scratches by hard objects during driving, repair and repaint the alloy wheels at a professional maintenance station as soon as possible. Over the years, all employees of the company have been determined to forge ahead, and the technology and equipment have been continuously improved, forming a full-coverage aluminum alloy wheel forging business. In order to adapt to the development of the market, a group of technical and management talents have been trained, and a good market reputation has been formed. It will develop in the direction of "higher and farther" and better serve the majority of car owners and the society.

What style of BMW forged wheels look good? The black material on the car wheels is actually carbon powder, and the brakes will clamp the brake calipers. After a long time, due to the constant friction between the two, it will settle down. It should only be covered lightly on the surface. However, due to the infrequent cleaning and maintenance of the wheel hub, the wheel hub is heated during daily driving, and the toner will slowly accumulate on the surface of the wheel hub.

Over time, coking became more and more difficult, and water could not wash it off at all. Every time you brake, the gravity of the car will move forward due to inertia, so most of the weight of the car is pressed on the front wheels, so the burden on the brake calipers increases, and the wear is naturally more serious than the weight of the rear wheel hub. The company has a management team with excellent technology and rich management experience, adheres to the corporate philosophy of "customer first", builds core competitiveness, gives full play to comprehensive advantages, strives for progress in stability, and creates an excellent brand in the alloy wheel industry, so that strong quality and fashion peers.

If the aluminum alloy wheel is broken, in order to save costs, you still go to some unprofessional places for repairs, then you are very wrong, so the repaired wheels are not guaranteed. In fact, many places are reworked by the original factory process, and the airtight test, grinding, painting and other processes can be reworked. If you're concerned about safety, the hubs are also cast from an aluminum alloy solution during the casting process.

Similarly, the welding is carried out by means of internal and external welding, and the same aluminum alloy material is used, so there is no need to worry about quality problems. Automobile wheels are mainly divided into steel wheels and light alloy wheels according to their materials. Light alloy wheels are mainly made of aluminum alloy and magnesium alloy. In today's automobile market, steel wheels are rare, and most models use aluminum alloy wheels, that is, light alloy wheels.

The aluminum alloy materials used to make aluminum wheels include A356, 6061, etc., among which A356 is widely used as cast aluminum wheels. A356 aluminum alloy has the characteristics of small specific gravity and good corrosion resistance. It is mainly composed of aluminum, silicon, magnesium, iron, manganese, zinc, copper, titanium and other metal elements, and aluminum accounts for about 92%, which is a mature aluminum alloy material.

What style of BMW forged wheels look good When a car wheel is turned against the edge of the road, it is easy to damage the outer edge of the wheel. In this case, the main structure has not changed, so the safety performance of the hub is basically not affected, as long as it is repaired. Blasting to clean dirt, sanding, putty filling, fine sanding and painting.

After these repair steps, the hub is basically brand new. The wheel hub is made of aluminum alloy, and the metal has poor fatigue resistance. After it is deformed under the action of external force, it is forced to return to its original state by external force.

Even if there are tiny cracks on the surface, the metal structure here is completely different from ordinary wheels from a scientific point of view.