What should I do if the Audi aluminum alloy wheel is deformed?

What to do if the aluminum alloy wheel is deformed? It is a high-tech enterprise in my country that focuses on the R&D, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) Office), the geographical position is superior and the transportation is convenient. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

The black material on the wheels of a car is actually carbon powder, and the brakes all clamp down on the brake calipers. After a long time, due to the constant friction between the two, it will settle down. It should only be covered lightly on the surface. However, due to the infrequent cleaning and maintenance of the wheel hub, the wheel hub is heated during daily driving, and the toner will slowly accumulate on the surface of the wheel hub.

Over time, coking became more and more difficult, and water could not wash it off at all. Every time you brake, the gravity of the car will move forward due to inertia, so most of the weight of the car is pressed on the front wheels, so the burden on the brake calipers increases, and the wear is naturally more serious than the weight of the rear wheel hub. What should I do if the Audi aluminum alloy wheel is deformed? Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "to satisfy all customers", and strong research and development Ability; the company has a complete and scientific quality management system.

The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". When the temperature of the car hub is high, it should be allowed to cool naturally before cleaning. Do not wash it with cold water, otherwise it will damage the aluminum alloy wheel hub, and even deform the brake disc, which will affect the braking effect.

In addition, cleaning the aluminum alloy wheel with a high-temperature cleaning agent will cause a chemical reaction on the surface of the car wheel, which will lose its luster and affect the appearance. If the hub of the car is bent, broken or severely corroded, it should be replaced in time. If damaged car wheels are not replaced, the tires are likely to slip off the car wheels, and the car may even lose control.

But if it's just scratches, it's not a big problem. The company was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production and brand management. Ordinary aluminum alloy wheels are light in weight and fast in speed.

The moment of inertia of aluminum alloy wheels is much smaller than that of steel wheels. Therefore, the installation of aluminum alloy wheels can make the car more sensitive in terms of acceleration, turning and braking, and the lightweight wheels can make the car speed up faster. In addition to excellent performance on flat roads, lightweight wheels can also improve comfort on bumpy roads.

The cooling effect is better. Aluminum alloy has high strength, narrow spokes, and easy styling, which can leave a larger ventilation space, accommodate larger brake calipers and brake discs, and reduce temperature more effectively. When the vehicle is moving forward, it presses down on a hard, sharp object that is higher than the distance between the outer edge of the car's wheel hub and the ground, and is located on the outer edge of the tire.

When the tire was pressed against the object, the sharp corner of the object just hit the outer edge of the tire, piercing the fragile outer edge of the tire (this would explain the radial fracture of the tire). After a tire blows out, it immediately loses its cushioning ability. A hard object hit the hub directly, causing the hub to break near the edge of the valve (this would explain the defect in the edge of the hub).

It then causes the entire hub to break. Or when the hub encounters a large pit, it will pass quickly, exceeding the bearing range of the hub, resulting in fracture. If the corrosion of the car hub is not repaired in time, the corrosion of the hub will be more serious, causing the tire to leak and shorten the service life.

Timely repair after the rust of the automobile wheel hub is not only beautiful, but also increases the service life. Scratches, deformations and damages are unavoidable problems in the long-term driving of the car. If the hub is not repaired and rebuilt in time, and if it is not dealt with for a long time, it is easy to cause traffic accidents and bring hidden dangers to the lives of yourself and your family.

Wheel refurbishment will clean and reduce the rust, dirt and other pollutants on the surface of the wheel hub, which can effectively reduce the air pollution caused by vehicle driving. What should I do if the Audi aluminum alloy wheels are deformed? Aluminum alloy wheels are more suitable for passenger cars than steel wheels. At present, their manufacturing processes can be divided into three categories. The first is casting, which is the process of choice for most car manufacturers today.

Low-pressure casting is a process in which molten aluminum is filled into a mold under pressure and solidifies and crystallizes under pressure. In the same situation, compared with gravity casting, the internal structure of low-pressure casting hub is denser and stronger. At present, low-pressure casting has become a process for producing aluminum alloy wheels, and most domestic aluminum alloy wheel manufacturers use low-pressure casting.