Instructions for using the aluminum alloy wheel adjustment device

aluminum alloyhubThe adjustment device includes stability, the stability is set above the correction, the correction table is placed inside the hub, the spring bolt is set on the correction side wall, the spring bolt head is set on the correction side, and the other end is set on the inner wall of the correction part. The correction table can be 360 The rotating platform is set under the hub, and the rotating platform is set as a boss matching the bolt mounting holes of the hub.

There are four evenly distributed spring bolts on the side wall of the correction table, and a layer of washers are arranged on the inner side of the spring bolts. The washers are rings, which are set on the outer wall of the hub, and the convex columns are set to stabilize the stage and correct the groove of the audience. , the convex column matches the groove, and the stable platform has the effect of stabilizing the correction platform.

Put the wheel hub into the correction table, and adjust the roundness by adjusting the spring bolts. At the same time, the wheel hub can be rotated to adjust the parts that need to be corrected, with high efficiency. Increased productivity and product quality.

There are four evenly distributed spring bolts on the side wall of the calibration platform, and a layer of washers are arranged on the inner side of the spring bolts, and the washers are rings arranged on the outer wall of the hub.