How to replace modern refitted wheels

How to replace modern modified wheels is a high-tech enterprise in my country focusing on R&D, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui). The geographical location is superior and the transportation is convenient. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

The compressive strength of aluminum alloy wheels is quite high, and the compressive capacity of ordinary household wheels is more than 20 tons. The use of such wheels in actual trucks can meet the requirements, but the brittleness of aluminum alloy materials is poor, that is, when the compression limit is 20 tons, the elastic deformation space before fracture is very small, as long as the standard basic fracture moment is exceeded. Therefore, off-road vehicles often do not use aluminum alloy wheels. Occasionally flying will easily cause the wheel to break, but again, the possibility of such a situation is very small for off-road domestic vehicles. The wheels of this material can meet various paved and normal non-paved roads. road commuting.

How to replace modern refitted wheels The company has accumulated many years of production experience in line with the principles of technological innovation and independent research and development, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "satisfy all customers", strong research and development capabilities; the company It has a complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". We all know that less unsprung weight leads to better car performance, better acceleration and braking, and better fuel efficiency.

The hollow design greatly reduces the weight of the car hub, and the aluminum alloy also provides sufficient strength for the spokes to support the rim. This is why many car owners want to replace forged wheels. Because the forged wheels are not only good quality, but also light weight.

Of course, the hollow design saves the aluminum alloy material used in the manufacture of the wheel hub, reduces the production cost of the wheel hub manufacturer, naturally reduces the cost, and consumers also enjoy benefits. How to replace modern modified wheels The company was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production, and brand management. Car owners should pay attention to low obstacles on the road during daily driving, and avoid getting too close to the roadbed when parking.

In this way, it is easy to cut off the wheel hub of the car, which will affect the appearance, and the anti-rust coating will also be scraped off, which will affect the water resistance and corrosion resistance, deform the wheel hub, and affect driving. Check for scars. If the inside of the hub is not damaged, wipe around the scar with paint thinner to remove dirt.

When cleaning, in order to prevent unrelated parts from being stained with paint, tape can be pasted around the scar. Use the brush tip to apply topcoat to the damaged parts of the car hub. After drying, it shrinks slightly.

Wheels are divided into aluminum alloy wheels and steel wheels, and aluminum alloy wheels are divided into forging and casting. The fatigue strength and bending strength of forged aluminum alloy wheels are much higher than those of steel wheels. Under the same environment, the heat dissipation coefficient of aluminum alloy wheels is three times that of steel wheels, and the maximum bearing capacity of forged aluminum alloy wheels is five times that of steel wheels. Aluminum alloy wheels have the characteristics of light weight, tire saving, beautiful appearance and so on.

At the same time, the safety of forged aluminum alloy wheels is much higher than that of steel rings. According to JIT standards, when the vehicle hits the threshold at 50 km/h, only the forged aluminum alloy wheels can keep running. When the surface of the car hub is worn by hard objects, the air can directly contact the aluminum, oxidize at the damaged part first, and then gradually spread to the surrounding area for oxidation in the future.

Oxidation of car wheels is usually caused by corrosive chemical products. Remove dust and debris, get clean alloy wheels from the store, and avoid acidic detergents. Mix the right amount of water and detergent in a bucket.

Sponge soaked in detergent and bucket. Squeeze the sponge bucket to avoid wasting detergent. Wipe the wheels with a sponge.

How to replace the modern modified wheels There are many styles of car wheels, which are easy to be scratched by stones or damaged by harmful substances, causing the wheels to rust easily. Many car owners have begun to pay attention to protecting their wheels and driving safely. For cars equipped with aluminum alloy wheels, compared with ordinary tires, aluminum alloy wheels have better cushioning and shock absorption performance, which greatly improves the comfort of the car when driving on uneven roads or at high speeds.

The wheel stretching process is to reduce the rolling resistance of the tire through stretching performance, thereby reducing fuel consumption. The thermal conductivity of aluminum alloy is three times that of steel, the heat dissipation effect is very good, the braking performance is enhanced, the service life of tires and brake discs is extended, and the safe driving of the car is effectively guaranteed.