How to replace Chery wheel hub

How to replace Chery wheels is a high-tech enterprise in my country that focuses on R&D, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui). The location is superior and the transportation is convenient. The company covers an area of ​​120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.

Car wheels play an important role in improving the appearance, but when choosing wheels, every detail must be meticulous. The parameters of the hub will affect the use of the hub and the vehicle. If the PCD value is incorrect, it may not install properly.

The ET value will not only affect installation and use, but also affect future upgrades and modifications. When reinstalling the car hub, attention should be paid to the size of the hole. If this size is smaller than the original size, it cannot be installed naturally.

However, if it is larger than the original size and no comparison measures are taken, the concentricity of the vehicle will be different when driving, resulting in abnormal noise and vibration of the vehicle, which will directly affect the vehicle in severe cases. Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "satisfy all customers", strong research and development capabilities; the company has Complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs".

Generally, the wheel hub sizes calibrated by car wheel manufacturers are: 15 inches, 16 inches, 17 inches, 18 inches and 19 inches. The small ones usually come with family cars, while the big ones come with more advanced ones. For example, for a family car that is generally less than 150,000 yuan, the official selections are 15, 16, and 17;

Although the high-configured large wheels look very sporty and enhance the appearance of the vehicle, they are not perfect. It has both advantages and disadvantages. How to replace Chery wheel hub was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production and brand management.

Wheels are divided into aluminum alloy wheels and steel wheels, and aluminum alloy wheels are divided into forging and casting. The fatigue strength and bending strength of forged aluminum alloy wheels are much higher than those of steel wheels. Under the same environment, the heat dissipation coefficient of aluminum alloy wheels is three times that of steel wheels, and the maximum bearing capacity of forged aluminum alloy wheels is five times that of steel wheels. Aluminum alloy wheels have the characteristics of light weight, tire saving, beautiful appearance and so on.

At the same time, the safety of forged aluminum alloy wheels is much higher than that of steel rings. According to JIT standards, when the vehicle hits the threshold at 50 km/h, only the forged aluminum alloy wheels can keep running. The density of steel is significantly higher than that of aluminum alloy building materials, which is why aluminum alloys have been used for the lightweight of automobile chassis in my country; automobile wheels are "unsprung parts".

If the unsprung mass cost is too large, it will inevitably affect the work performance, handling performance and actual fuel consumption. Just like a car hub, the weight loss of the hub is a direct result of the controlled torque output of the engine; because the powertrain transmitted to the wheel via the half shaft needs to be able to overcome the priority thing is the mass of the wheel (weight/drag during operation) , so the power at the hub of the car needs to be synchronized and can be lowered. Many car owners accidentally hit the side of the road or a corner when parking, scratching or causing the wheels to deform.

Scratches are not a big problem, if the car hub is deformed or just falls off, it needs to be replaced. Car owners should pay attention to daily driving to avoid scratching the hub due to luck. Pay attention to daily maintenance, check and clean the oil regularly, and there will be no major problems.

Wash the car hub with clean water and wait for the hub to cool down before washing. When the car is running, the wheel hub will rub against the tires and brake pads to generate heat. If you wash it with water immediately, the material of the hub will change, which can easily cause discoloration of the outer coating. Use soap and water to wipe off the oil.

How to change Chery wheels Coating automobile wheels In order to enhance the external beauty of aluminum alloy wheels and protect the environment, the traditional painting process and electroplating process will be gradually reduced and replaced by water-based powder coating technology. After polishing and spraying transparent powder, the appearance of bright metal hub can replace electroplating. Coated wheels are not only colorful, but also environmentally friendly and exquisite, which can meet your needs to a large extent.

Brushing is a means of surface treatment, through the grinding of products to form lines on the surface of the workpiece, so as to play a decorative role, because this tire seems to have two colors, and the surface is shiny, which is also one of the important factors for car owners to choose wheel brushing one.