How much is Volvo aluminum alloy wheels custom-made? It is a high-tech enterprise in my country that focuses on the R&D, design, production and sales of aluminum alloy wheels, and an export base of auto parts in my country. It is located in Guangde Economic Development Zone, Anhui (the junction of Jiangsu, Zhejiang and Anhui) Office), the geographical position is superior and the transportation is convenient. The company covers an area of 120 mu, with a registered capital of 118 million yuan, total assets of nearly 180 million yuan, and more than 300 employees. It has 11 authorized inventions, 18 utility model patents, and 40 design patents. The company's stock was listed on the New Third Board on August 12, 2016. The stock code is 838269. The stock is referred to as "Technology". Special new "small and medium-sized enterprises, provincial high-tech cultivation enterprises.
Ordinary aluminum alloy wheels are light in weight and fast in speed. The moment of inertia of aluminum alloy wheels is much smaller than that of steel wheels. Therefore, the installation of aluminum alloy wheels can make the car more sensitive in terms of acceleration, turning and braking, and the lightweight wheels can make the car speed up faster.
In addition to excellent performance on flat roads, lightweight wheels can also improve comfort on bumpy roads. The cooling effect is better. Aluminum alloy has high strength, narrow spokes, and easy styling, which can leave a larger ventilation space, accommodate larger brake calipers and brake discs, and reduce temperature more effectively.
Based on the principle of technological innovation and independent research and development, the company has accumulated many years of production experience, and always adheres to the marketing purpose of "customer first, honest management"; the demand is "to satisfy all customers", strong research and development Ability; the company has a complete and scientific quality management system. The company's integrity, strength and product quality have been recognized by the industry. Taking quality as the core, adhering to the business philosophy of "internationalization, branding, and scale", it is committed to "continuous improvement, pursuit of high-quality products, improvement of service quality, and satisfaction client needs". The material development of ordinary automobile wheels is not ordinary pig iron, but steel with a carbon content of 2.0% or less; but the proportion of pig iron is as high as 2.0% to 4.5%, so in mechanical design, there is a big gap between the strength and toughness of the two different materials .
However, even steel is not very strong. For example, body A-pillars made of hot-formed steel with a yield strength of up to 1,500 MPa may still bend in a crash. Therefore, the compression ability of the steel wheel hub is relatively weak, that is to say, it is relatively simple and easy to deform.
Volvo Aluminum Alloy Wheel Customization Company was founded in 2011. After more than seven years of development and operation, the company has become a large-scale enterprise in the domestic aluminum alloy wheel industry with product serialization, large-scale production and brand management. Clean the car wheels and check for any scratches, depth of scratches, damage to the wheels. For example, a car wheel with cracks, deformation or complete fracture on the surface cannot be repaired.
After washing the hubs, dry them with a towel. After cleaning, pay attention to cleaning the hub with oil wax paper. First remove the tire, release the tire pressure, squeeze the tire into a flat state, and then directly remove the rim on the tire puller (this can avoid the tire from entering water during construction). If the wheel hub is not damaged or deformed, it can be repaired. After cleaning the wheel hub , dry with a towel, and pay attention to cleaning the hub with wax paper after cleaning.
In order to ensure the safety and reliability of the vehicle to a large extent, no matter how old the vehicle is, it is necessary to check the wheel hub of the car frequently, and pay attention to whether there are early warning signs of wear, including friction noise when turning or suspension combination wheel turning. Abnormal deceleration. If you hear car wheel bearing noise, first, it is important to find out where the noise is coming from. Many moving parts may create noise, or some rotating parts may be in contact with non-rotating parts.
If it is confirmed that the bearing is noisy, the bearing may be damaged and needs to be replaced. Since the failure conditions of the bearings on both sides caused by the front hub are similar, even if only one bearing is damaged, it is recommended to replace it in pairs. There are many styles of car hubs, which are easily scratched by stones or damaged by harmful substances, resulting in easy rusting of the hubs.
Many car owners have begun to pay attention to protecting their wheels and driving safely. For cars equipped with aluminum alloy wheels, compared with ordinary tires, aluminum alloy wheels have better cushioning and shock absorption performance, which greatly improves the comfort of the car when driving on uneven roads or at high speeds. The wheel stretching process is to reduce the rolling resistance of the tire through stretching performance, thereby reducing fuel consumption.
The thermal conductivity of aluminum alloy is three times that of steel, the heat dissipation effect is very good, the braking performance is enhanced, the service life of tires and brake discs is extended, and the safe driving of the car is effectively guaranteed. How much does Volvo aluminum alloy wheels customize? Car wheels play an important role in improving the appearance, but when choosing wheels, every detail must be meticulous. The parameters of the hub will affect the use of the hub and the vehicle.
If the PCD value is incorrect, it may not install properly. The ET value will not only affect installation and use, but also affect future upgrades and modifications. When reinstalling the car hub, attention should be paid to the size of the hole.
If this size is smaller than the original size, it cannot be installed naturally. However, if it is larger than the original size and no comparison measures are taken, the concentricity of the vehicle will be different when driving, resulting in abnormal noise and vibration of the vehicle, which will directly affect the vehicle in severe cases.