News
VR

how to install How to choose the wheel size? Are big wheels really good?? | JWHEEL

Installing wheels must first understand the values on the wheels, including size, width, E T value, PCD and hole position. Wheel width, commonly known as the J value, is a direct impact on the choice of tires, the same size tires, J value is different, the choice of tire flat ratio and width is different, you can refer to the following table:


May 09, 2023
how to install How to choose the wheel size? Are big wheels really good?? | JWHEEL

When you usually look at the model introduction have you found a phenomenon: is that some models of different configurations in addition to some performance, configuration differences, wheel size is also different. The more expensive the configuration the larger its wheel size, the appearance also looks more sporty and better.


But the big wheels straight is necessary to choose? What is the difference between the normal size and the usual use? What are the changes and differences after the wheel upgrade?

What are the changes and differences after upgrading the wheels?

Common wheel sizes

Usually the original factory standard wheel sizes are: 15 inches, 16 inches, 17 inches, 18 inches, 19 inches, the small size is usually assigned to the family car, the larger size will be equipped with a more advanced car.


If you are not clear about the size of their car wheels, you can look at the numbers on the tires, usually our tires will be marked on the number of three groups, similar to: 225, 60, R17, the size unit is millimeters. 225 is the width of the tire in contact with the ground; 60 is the tire flat rate; R17 corresponds to the size of the wheel, so this is 17-inch wheels.



Advantages and disadvantages of large size wheels

Advantages


The larger the wheel, the lower the flat ratio, which means thinner tires and clearer and more controlled feedback on road conditions.


This is why many sports and racing cars have large wheel sizes.

Disadvantages


However, the shortcomings brought by large wheels cannot be ignored, because in order to balance, the wheel size is large, the flat ratio becomes lower, the tire wall is thin, then it rides less comfortable, and the relative fuel consumption will also increase. If you are very concerned about the economic fuel consumption, you should be more careful in the choice of wheel size.

  

Understand the parameters clearly before retrofitting

  Installing wheels must first understand the values on the wheels, including size, width, E T value, PCD and hole position. Wheel width, commonly known as the J value, is a direct impact on the choice of tires, the same size tires, J value is different, the choice of tire flat ratio and width is different, you can refer to the following table:


If the original 17-inch wheels, but want to upgrade the size, such as 18-inch wheels, then it corresponds to a higher J-value, according to the formula of the old and new tire diameter difference should be controlled at 3% up and down, so as to protect the safety of driving, so it is optional tires are wider, the natural tire wall is also thinner. What are the changes after the wheel size upgrade?

 

The wheels are larger, the tires are wider, the walls are thinner, so if you are not careful, it will have a higher chance of bulging or flat tires than small wheels.



  Jwheel, as an professional wheel manufacturer, concentrates in R&D and manufacturing of aluminum alloy wheels, including casting wheels, forging wheels and flow-form wheels. The products of it have passed the certifications of SEI、SEMA,VIA, JWL, JWL-T, TUV and so on. Since establishment, Jwheel has been developing steadily, with rich experience of designing and producing aluminum alloy wheels. It has earned the appreciation of both domestic market and foreign market with its high technology, good quality and customer service. It provided OEM service to many international brands like Vossen, OE Wheel, TSW, Rays, ProLine, Oxygen, AUTEC, etc., and it also provide ODM service, that is, for producing a new wheel, you can just provide a sketch, drawing or picture, and then Jwheel will finish the rest parts. By the way, the MOQ of forging wheels is four. (For more information, just go to the website: https://www.jjjwheel.com)

 


TYPE :

J272    17x7.5    41    110*5    65.1    U35AR    640KG     




                               





Optimized body frames of  are obtained with such design of .

FAQ

1.Q: What’s your delivery time?
A: 35-60 days after deposit is done.
2.Q: Do you support OEM/ODM ?
A: Yes, OEM/ODM is ok, the size, color ,ET,J, PCD ,all can be customized.
3.Q: Why choose us?
A: 1. Lowest factory price with good quality. 2. Low MOQ. 3. On-time delivery. 4. Welcome to visit our factory ,our machine and our workshop will help us speak more.

Advantages

1.The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating and We have formed a complete testing system from the incoming inspection of raw materials to the factory inspection of finished products, and our testing capabilities range from material and performance to dimensional and impact and fatigue testing, and then to the testing of the coating performance of finished wheels.
2.The company has been focusing on quality, management and environmental protection, and has passed. ISO 9001:2015, IATF 16949, Germany KBA, Japan VIA association certification (laboratory certification).
3.We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of "low-pressure casting + spinning". We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers' needs and lead the industry development.
4.The company is located in Guangdong, Hong Kong and Macao Bay Area, an important node city of Jiangmen. With modern production facilities, we adopt the industry's advanced casting, machining, painting and inspection equipment, equipped with automatic robots throughout the process, and with ERP system and other advanced management means, to create the industry benchmark for hardware, software and product quality.

About JWHEEL

Guangdong Guangchuan Auto Parts Trading  has its first plant established in 1993. After over 29 years’ development, Guangdong Guangchuan Auto Parts Trading has become a world-leading supplier for many international famous wheel brands. Guangdong Guangchuan Auto Parts Trading has an annual production capacity of 1.5 million and it provides one-stop solution for design and manufacturing. It’s equipped with advanced production facilities such as aluminum alloy melting furnace, casting production line, spinning and forging equipment, automatic painting line, helium leak detection system and automatic dynamic balance inspection system.


Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --
Chat with Us

Send your inquiry

Choose a different language
English
ภาษาไทย
Nederlands
हिन्दी
한국어
日本語
العربية
Português
italiano
русский
français
Deutsch
Español
简体中文
Türkçe
Current language:English