JWHEEL custom alloy wheels supplier specializing in the production of AL-Alloy wheels for 20 years.
Language
JWHEEL custom alloy wheels supplier specializing in the production of AL-Alloy wheels for 20 years.
1. Whether the wheel is engraved with safety certification marks. Qualified wheels will generally have these marks printed on the front of the wheel, mainly including: German TUV/KBA, American DOT/SFI, Japanese VIA/JWL.
2. The number of loads marked on the wheel*4 to see if it is greater than the weight of your whole vehicle.
How to identify whether a wheel is qualified or not?
In order to give you a better understanding of wheels and prevent you from falling into the pit, jwheel is here again to give you a general introduction.
Today, we will focus on how to identify whether the wheels are qualified or not.
A qualified wheel generally has to meet the following 2 conditions
There are so many wheels on the market, and the price varies greatly, some cost only a few dollars, while others cost thousands or even tens of thousands of dollars. Qualified wheels, in general, have to meet the following elements.
1. Whether the wheel is engraved with safety certification marks. Qualified wheels will generally have these marks printed on the front of the wheel, mainly including: German TUV/KBA, American DOT/SFI, Japanese VIA/JWL.
2. The number of loads marked on the wheel*4 to see if it is greater than the weight of your whole vehicle.
Judging by the workmanship of the wheel
As fake or high imitation wheels are not manufactured with high mould precision, their corners may have a lot of sticking burrs and look very rough, while real wheels do not have this problem. In addition, real wheels, i.e. genuine wheels, have the same paint colour inside and out, but fake wheels can have a big difference in colour inside and out for cost reasons. The difference between the two can be easily seen in the workmanship and the colour of the exterior.
Judging by the weight of the wheel
The weight of genuine wheels of the same style and specification is basically the same, while fake wheels may have weight differences due to irregularities in the process and the lack of strict control over raw materials.
Judging by the price of the wheel
"One of the main reasons why car owners buy fakes is because they are blindly greedy for a cheap price. Even in the age of the internet, businesses have less channels and shop costs, but the cost of the real wheel itself is on the line, so if the price is too cheap, then beware, it's likely to be a high replica.
JWHEEL is meticulously designed. Various calculations are performed considering the desired speed and loads to decide its material and specific dimensions.
FAQ
1.Q: What’s your delivery time?
A: 35-60 days after deposit is done.
2.Q: Where’s your factory ?
A: My company is in Jiangmen City, just need 1 hour from GuangZhou BaiyunStation to our factory.
3.Q: What’s your payment method?
A: T/T , L/C.
Advantages
1.The company has been focusing on quality, management and environmental protection, and has passed. ISO 9001:2015, IATF 16949, Germany KBA, Japan VIA association certification (laboratory certification).
2.The company has obtained a number of patents by virtue of its strong technical strength: Patent for a clean grinding table based on aluminum alloy wheels.
3.The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating and We have formed a complete testing system from the incoming inspection of raw materials to the factory inspection of finished products, and our testing capabilities range from material and performance to dimensional and impact and fatigue testing, and then to the testing of the coating performance of finished wheels.
4.We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of "low-pressure casting + spinning". We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers' needs and lead the industry development.
About JWHEEL
Guangdong Guangchuan Auto Parts Trading has its first plant established in 1993. After over 29 years’ development, Guangchuan Auto Parts Trading has become a world-leading supplier for many international famous wheel brands. Guangchuan Auto Parts Tradinghas an annual production capacity of 1.5 million and it provides one-stop solution for design and manufacturing. It’s equipped with advanced production facilities such as aluminum alloy melting furnace, casting production line, spinning and forging equipment, automatic painting line, helium leak detection system and automatic dynamic balance inspection system.
